Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Help! My lid is stuck

Posts

Help! My lid is stuck

#1

Help! My lid is stuck

Jim Canning

I finished a tall vessel with a lid in maple and I used walnut oil for the finish. Then I set it aside, but I put the lid on. Two days later I went to move it I tried to take the lid off and it would not move. It is tighter then Zips _ _ _, Zip for you young kids was Charlie McCarthy's dummy.

My question is do I heat it up or cool it down to make the wood expand so I can take the lid off? Thanks in advance.

Jim Canning

Re: Help! My lid is stuck

#2

Re: Help! My lid is stuck

Mike Jones in Redding, Ca.

Compressed air forced into the join between lid and vessel is pretty sure fire.

Re: Help! My lid is stuck

#3

Re: Help! My lid is stuck

woodspinner

Or drill a tiny hole in the bottom and put the air in there. Next time do not put the pieces together for a few days.

Re: Help! My lid is stuck

#4

Re: Help! My lid is stuck *LINK*

joazhill

Put it in the freezer overnite. However, one part or the other is going to have to go back on the lathe or a tiny file.


ShapeShifter