Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

OT - LP to MP3 conversion

Posts

OT - LP to MP3 conversion

#1

OT - LP to MP3 conversion

Don at Central Illinios

SWMBO is planning on gettng me a turntable so I can convert some old 78's to CD's, iPod, etc. On all of the turntables I've seen they have 33 1/3 and 45 with a 'software' conversion for 78's. My question, will I be able to play a 78 at 33 1/3 and then use the software to convert it to a usable file? I know there are a lot of tecno's out there, just looking for some answers. TIA.

Re: OT - LP to MP3 conversion

#2

Richard Allen

Re: OT - LP to MP3 conversion

Richard Allen

yes.

The sound quality will be degraded but the sound quality of the 78s are poor anyway so there should be no loss in quality.

There are turntables with a 78 rpm speed so the extra software step isn't needed.

Radio Shack sells one that does 33 1/3 45 and 78 with the USB, and RCA jacks.... No doubt there are many other turntables available that do 78s

"Vinylwriter Pico� USB 2 PC Recordable Turntable" for $80

Buy.com also has this turntable for less.

The time it takes to process a 78 done at 33 1/3 is longer (slower recording speed, software conversion time).

Re: OT - LP to MP3 conversion

#3

Re: OT - LP to MP3 conversion

Jeff Rich

Audio Technica has a turntable and software package for just you application.

Re: OT - LP to MP3 conversion

#4

Re: OT - LP to MP3 conversion

Don at Central Illinios

Well I'm headed to Radio Shack tomorrow to see what they have. If nothing else I'll try online. Thanks for the suggestions.

Re: OT - LP to MP3 conversion

#5

Re: OT - LP to MP3 conversion

Scott Crumpton

A lot depends on how good of a transfer you want to get and how much control you want to have over it. I've done several hundred LPs along with a few 45s, 78s, cassettes, and even some R2R tapes.

For records, my setup is an old Sony direct drive turntable with two headshells and cartridges, one for 78s and the other for everything else. The pre-amp is a PA 928 flat preamp from Tracer Tech. Playback EQ is done in software, as is the 45 rpm to 78 rpm conversion.

The software is Diamond Cut, also from Tracer. (Just a satisfied user.) Suggest you check out their websites, forums and other doc before committing any money to this project.

---Scott.