Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Walnut Vessel (at an angle)

Posts

Walnut Vessel (at an angle)

#1

Walnut Vessel (at an angle)

Greg Haugen

Here's a new small Walnut Vessel. This vessel doesn't have the traditional bottom because I wanted it to sit at an angle. I like the look that it creates. I did carve a small concave "resting place" so it doesn't roll. It's approximately 3" diameter and 4" long. Finish is Waterlox.

Comments welcome.


Re: Walnut Vessel (at an angle)

#2

Very interesting.

john lucas

Re: Walnut Vessel (at an angle)

#3

I like it!

Matt Overton

Re: Walnut Vessel (at an angle)

#4

Re: I like it!

fgvanatta

Well, that's different. I like it.

Frank

Re: Walnut Vessel (at an angle)

#5

Re: Walnut Vessel (at an angle)

GaryG in MD

Greg,

I like it, and I like the fact that you're thinking just a little outside the box.

I just completed the turning [can't say "finished" ;-) ] on a small mesquite winged "amphora" shape. After some thought, I decided that I like the "pointed" bottom shape as is, and that none of the standard foot options would look as good as "none"; so it has none. It will either sit tipped on the wings, at an angle not unlike your HF here, or be supported in a raised wire ring. I'm tending to think it can just sit like this at an angle. I think that makes it look like it wants to be picked up. Isn't that the point?

Well done, Gary

Re: Walnut Vessel (at an angle)

#6

Steven Antonucci

I've done a few like this

Steven Antonucci

My wife's first reaction is always, "um...thanks nice...I guess"

I don't think a lot of people realize how ancient of a form this is? I wonder if the Greek potters had the same reaction from their wives?

In any case, well done!

S

Re: Walnut Vessel (at an angle)

#7

Re: Walnut Vessel (at an angle)

Greg Haugen

Gary,

That sounds really neat. Please post pictures of it when you're done. Can't wait to see it.

Thanks for the comments.

Greg

Re: Walnut Vessel (at an angle)

#8

Re: I've done a few like this

Greg Haugen

Steve,

Back then they probably had it worse. Didn't they have a lot of wives. Geesh! :D

They are many turners who's work I admire and inspired by. All for different reasons. I like Trent Bosch's and Don Derry's work since they're usually thinking outside of the box, sometimes WAY outside. They're work is what comes to mind first when I think of pieces without traditional bottoms.

Thanks for the comments.

Greg.