Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Coring Tool Seminar

Posts

Coring Tool Seminar

#1

Coring Tool Seminar

Bill Grumbine (Kutztown PA)

I was going to post this after the symposium, but some back channel discussions have spurred me on to post it now. With all the carrying on here about Kel McNaughton coring tools on this board, I have been having several conversations with several people. As many know, this tool works well for me. I have demonstrated it for more clubs and more individuals than I can remember. I dedicated part of one of my videos to its use. I am going to continue on in that vein with the following. Sometime late this summer, I am going to offer a coring tool seminar in my shop, dedicated to the proper use of the Kel McNaughton coring tool. This will be free to anyone who wants to come. There will be several requirements.

First of all, you will have to let me know you are coming. I do not appreciate surprises. If you show up unannounced because you couldn't be bothered to tell me you were coming, don't be surprised if you get a less than warm welcome.

Second, you will need to bring your own wood to core. That stands to reason.

Third, this is not a free class on basic turning techniques. I will expect that those in attendance will have the basic skills down. That is not to say I will not offer a few tidbits or a little advice from time to time, but don't come expecting a free lesson on which way the sharp end points. If you have no experience or little experience, you are still welcome to attend and watch. It is free, remember? You just have to get here. Just don't expect much in the way of basic turning lessons. We are going to be concentrating on coring.

I do not have a date set yet, but that will come sometime at the end of June or beginning of July. This is a teaser to get people interested and thinking. I already have enough interest to make this go. I will pick the date. I will entertain input, but I will not be bound by it. If anyone has questions or suggestions, please feel free to email me about them.

Oh yeah, one last thing. If you are the type who frowns on someone exercising all his Constitutional rights, you might not be comfortable here. ;) But even with all that, it is going to be fun. It is always fun here. Think Five Barns Lite. We have room for more than 100 people here, so don't worry that you won't have room. We just might have to move the lathe outside.

Re: Coring Tool Seminar

#2

Re: Coring Tool Seminar

Terry Scott

Bill thats very generous of you

For anyone down my way Id like to offer the same as Bill

Just contact me and we will organize a time

It can either be done at my workshop or the South Auckland Woodturners Guild

Like Bill I am of the belief that practice makes perfect ,so if you are having problems come along bring your own bowl saver if you want to.Ill even supply the timber

Re: Coring Tool Seminar

#3

Re: Coring Tool Seminar

robo hippy

You would have to live on the other side of the country. I have extended the offer to others as well, if you are in my neighborhood, stop on by. July is a bad month for me, shows for most of it.

robo hippy

Re: Coring Tool Seminar

#4

Dick Hines

Sorry Bill

Dick Hines

You loose out to terry. The fishing is better down there. :D

Re: Coring Tool Seminar

#5

Maybe, But

Mark Mandell - Gone Round In Jersey

The airplane ride'll wipe you out. :D

Re: Coring Tool Seminar

#6

Wish I could attend one-but

John Lucas

I simply don't have the time or the money, even though the workshop is free. I certainly would enjoy shooting with Bill. :)

Re: Coring Tool Seminar

#7

Re: Coring Tool Seminar

Bill Turpin in WNC mountains

If possible, this other BIG guy will be there. 5B-2008 was too long ago.

Re: Coring Tool Seminar

#8

Re: Coring Tool Seminar

Bill Grumbine (Kutztown PA)

Emails are coming in! Judging by some of the comments I am getting, we may have to schedule a separate range trip along with the coring stuff.

Here are a few more things to consider, based on comments I have been getting. I have two large lathes and we can core on both at the same time. The spindle on both is 1 1/4" x 8 tpi, so if anyone wants to bring their own chuck, that would be a good idea.

For those attending, if you can round out the outside of any bowls you want to core before you get here, that will save a lot of time. We can spend more time coring, and less time roughing and cleaning up. The tractor and cart will be on standby with the snow shovel for that. We can still do some rounding up of bowls though, especially if anyone wants to see how fast a Doug Thompson 5/8" V gouge can go.

More details will come as I think of them, and to those of you who have already written, I will be responding to your emails later on today.

Re: Coring Tool Seminar

#9

Re: Coring Tool Seminar

Matt Overton

Bill, I will be there if my schedule allows. You are only a couple of hours away. Thank you for your generosity!

Re: Coring Tool Seminar

#10

Re: Coring Tool Seminar

Bill Turpin in WNC mountains

Bill, have you set a date yet?

Re: Coring Tool Seminar

#11

Re: Coring Tool Seminar

Bill Grumbine (Kutztown PA)

Not yet Bill, but we are closing in on one, probably early August. Not to fear, I have a new AC unit in the shop! :D