Hosaluk Handle Insert question.
Scott Burr in Ben Lomond CA
If I recall, someone here was making these inserts for a lot less cash than the original ones.
Am I remembering correctly?
I'd like to order some if possible.
Thanks!
Knowledge You Can Build On — Est. 1998
Hosaluk Handle Insert question.
Scott Burr in Ben Lomond CA
If I recall, someone here was making these inserts for a lot less cash than the original ones.
Am I remembering correctly?
I'd like to order some if possible.
Thanks!
Re: Hosaluk Handle Insert question.
Bill Howatt
I made something similar from brass rod. Turns and drills fairly easy on a wood lathe and easy to tap the set-screw holes.
On the other side of the coin, I found it more convenient just to make a wooden handle for each tool rather than changing the tools in the handle.
Bill
Re: Hosaluk Handle Insert question.
Mike Stafford
Our dear departed friend Dennis Yoder was making inserts similar to the Hosaluk inserts that were very reasonable in price.
Oh good heavens!
Steve Kubien
I've got about a foot of 3/4" brass rod which has been in my tool cabinet for about 6 years. Now I know what to do with it! This is very timely as I have a few tools which would benefit from new handles.