Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

The bowl that took 3-1/2 hours to turn, and more

Posts

The bowl that took 3-1/2 hours to turn, and more

#1

The bowl that took 3-1/2 hours to turn, and more

wilbur

Thanks for all the comments from the question I had posted Friday night. I thought I would show you what it took me 3-1/2 hours to do.


I made two more. At least some of the time it took me to make the first bowl must have been due to being somewhat rusty and out of practice, since these took me a good 45 minutes less to do.



And all three together, in order from left to right.


I like the one on the right the best, which was the last one of the three that I did. The one in the middle has a thinner wall, but I didn't like how the foot of the bowl turned out, although I can claim that it has an Asian-inspired shape. (That's one of the benefits of being a Chinese woodworker. ;) ) I like the inclusion in the bowl on the left, but I could have done a better job getting deeper into the bottom of the bowl on the inside.

These bowls are gifts for the medical staff at the Hole in the Wall Gang Camp in Ashford, CT, which is a camp for kids with cancer and blood disorders. I've been going for a week each summer to be the volunteer camp doc. This is the sixth year in a row that I've been able to go, and since I started woodworking a few years back I've been trying to bring some sort of gift to the folks that run the camp. I'm leaving for camp tomorrow, so that's why I was kind of focused on time in making these over this weekend. Hopefully they'll like these bowls. I think they are a lot better than the small cherry bowls I made a few years ago.

Re: The bowl that took 3-1/2 hours to turn, and more

#2

Time means nothing

Dave Peebles Lyons, Ohio

Wilbur,

These look great!! I don't care if they took you a week. It is the end result that matters.

And to top it off, it is a wonderful selfless act on your part.

Well done my friend,

Best wishes,

Dave

Re: The bowl that took 3-1/2 hours to turn, and more

#3

Re: The bowl that took 3-1/2 hours to turn, and mo

Cyril Griesbach

Very nice bowls, Wilbur, for a wonderful cause.

Re: The bowl that took 3-1/2 hours to turn, and more

#4

Steven Antonucci

Fine looking bowls

Steven Antonucci

I have some smaller ones in ambrosia maple that I made from offcuts this weekend. I won't be oiling them to keep the brown/white contrast, but they are Asian inspired rice/tea bowls (even though I'm not Chinese...!)

I cut them in about 10 minutes each, but they are only 4" or so wide. If I want it to take an hour, I'll get out my bowl saver :b

I bet that your recipients will think they took lots more than 3 days, and be very thankful that you thought of them. Good work, and good karma...

S

Re: The bowl that took 3-1/2 hours to turn, and more

#5

Re: The bowl that took 3-1/2 hours to turn, and mo

john lucas

Fine looking bowls. I would not worry about taking 3 hours to turn and finish a bowl. I've done that, and fairly recently. Although I turn a bowl really quick now sometimes I get obsessive about the sanding and finishing. If I get to 320 grit and see scratches I'll go back to 120 or whatever it takes to get it out and sand through the grits again. I hate it when that happens but then I tell my self I'm out there to have fun and create pieces that are the best I can do so time shouldn't matter.

Re: The bowl that took 3-1/2 hours to turn, and more

#6

Worth every minute and then some !

Don Orr

Re: The bowl that took 3-1/2 hours to turn, and more

#7

Steve Kubien

Re: The bowl that took 3-1/2 hours to turn, and mo

Steve Kubien

That's a nice set Wilbur.