Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Pyrography - Brown stained edges

Posts

Pyrography - Brown stained edges

#1

Pyrography - Brown stained edges

jake Niedling

I did some wood burning on a small hollow form. I have some light brown staining along the edge right next to the unburned wood. I think there is a way to clean this up but just can't remember. So I need your help. Thanks, Jake

Re: Pyrography - Brown stained edges

#2

Re: Pyrography - Brown stained edges

Dick Coers

I use denatured alcohol on a rag to clean up after the laser engraver. Works great.

Re: Pyrography - Brown stained edges

#3

Re: Pyrography - Brown stained edges

Barbara Gill

If you don't have denatured alcohol, vodka works just fine. :-)

Re: Pyrography - Brown stained edges

#4

Isoprophyl alcohol

Molly Winton

91% is the best, but if you can't find any 70% works well too. It's also great for removing the graphite left over from any pencil marks you may have visible.

Re: Pyrography - Brown stained edges

#5

Re: Pyrography - Brown stained edges

Terry Scott

I use Acetone you can by from a paint shop

Re: Pyrography - Brown stained edges

#6

cool

Mike Foster

I found the same problem when experimenting with the wood vaporizer and decided to just paint them all black. I thought the wood had slightly charred/burnt and the only way to get rid of it was rather laborious sanding. I'll give this a try tonight.

Mike

Re: Pyrography - Brown stained edges

#7

Thanks - It works.  Much appreciate.

jake Niedling