Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Iron Maiden

Posts

Iron Maiden

#1

Iron Maiden 

Terry Scott


Not often but sometimes a piece just gives you the vibes this was one of them

Its made from Iron Bark with Black palm as the lid and Cocabola as the finial

First time I have turned this timber what a dream

Thanks Michele and Darrel Pointon Ill be around on the weekend with cheque book hoping you have some more

I have to admit to having 3 or 4 goes at a finial until I ended up with this one

Trying to get the work balanced and to flow through the lid and finial was an act

Why the big opening well it seems I can no longer enter My finial boxes into Box categories at shows as they no longer comply. A box know has to be able to have something placed inside. The big hole did allow me to finish the inside to 1200 grit the same as the out side However allot harder to keep the form from losing it

4 � inches square

What do you think ?

A better name if you have one would be appreciated

I hollowed this by using my brand new Mini Kelton Hollowers for the first time (slap my wrist I brought them a month ago )After Eli Aversera stayed for a week and I played with his .I have found that I can really get in through some small holes

I then used my negative rake scraper I have made so the small ridges left in hollowing were easily removed little sanding was needed as this stuff cut a dream

2mm thick in the walls

I sanded with paraffin oil to prevent over heating

This piece is turned cross grain so the wings retain the strenght with support of the fibers Yes the wings were turned with the skew between centers

Re: Iron Maiden

#2

Re: Iron Maiden

Matt Overton

elegant, as usual. The finial was worth the effort, it works with the piece beautifully.

Re: Iron Maiden

#3

I agree with Matt - terrific piece

Jeff Willaford

Re: Iron Maiden

#4

Re: Iron Maiden

Bob Macgregor

Nice piece.

Let's see...that's an iron maiden...if two of the four corners were turned up, would it be a Marilyn Monroe?

BOB

Re: Iron Maiden

#5

Now THERE's An Idea For A Piece

charlie belden

Re: Iron Maiden

#6

Steven Antonucci

turn and carve an Eddie finial?

steven antonucci

If you truly want to make an Iron Maiden piece, it will need an Eddie finial.

I turn to Iron Maiden all of the time. Hard to not air guitar on my bowl gouge...

Non-obvious metalhead.

Steve