Vicki's tree project
John Jordan
We had a big sugar maple right next to our 200 year old house that had to be taken down last week. Vicki (my wife, that many of you know) played in it when she was a child, our kids grew up playing in it, and our young grandchildren climbed and had a tire swing in it. The tree is probably 100 years old.
My friend, Joel Benson from Memphis came up and cut it down. He's a master, and it took about three hours for him to do it, with just a little help from us on a rope etc. The tree had three large sections, and he took down two of them, one right over the house. The third and tallest section was left and dropped with the trunk-about 80 feet high altogether. The one picture shows Joel standing at the tallest branch with a stick laying on the ground to show where it would fall, and as you can see, he was on the money. Pretty amazing to call your shot like that. 
Anyway, since I was not sufficiently committed to using the wood in Vicki's view
, she decided to ask a few folks if they would make something from her much loved tree. Not for us, just to have some of the wood used, and for us to get photos of the work produced. Well, everyone she asked has said yes so far, and this thing is kind of growing bigger than I imagined. I gave away a lot of the wood right off the bat, and have been cutting for a couple of days. Several of the people on the boards have been sent pieces, too.
What I'm getting around to, is that there's been enough interest, that we figured to some degree, the more the merrier. So, if anyone is interested, and you are sufficiently experienced to use a piece of the wood, send us an email. You don't need to be a pro, or famous, and it's not a competition, but it's not just free practice wood either. All we ask is you have some fun making something, and you can keep it, sell it or give it away, but you have to send us a good photo. We would also like to have some photos documenting some paerts of your work. We'll assemble what we get into something to share, maybe an article and certainly something for the web. It should be interesting as there are all sorts of people involved. I don't know if anyone has done anything like this with a lot of people.
There is some very nice wood, quite a bit of plain, white straight grained for the painters/burners/carvers, some with figure (the grain can go in different directions), Some wood has some color, a little bit of spalting on a few pieces. I can do end grain for hollow pieces, side grain for hollow pieces. There's a lot of bowl blank sized stuff 4-5" to 9-10". I can do some larger pieces if you really need it, but it's limited. Natural edge pieces, too if anyone wants. Maybe a few crotch pieces. Small pieces for boxes, pens, stoppers. Let me know a couple of choices or what you think you would like to make, I'll see what I can do. I would entertain special requests, but no promises. All of this is limited, and I have no idea how people will respond.
And I'm getting tired and running out of time. We have to get ready and leave for Hartford SOON.
Also, I'm becoming poor shipping this stuff. If you want it, and can spring for flat rate shipping, it would help, but I'll pay for it if need be. Don't let that stop you. I put what I can in the medium or large flat rate boxes.
Vicki's pretty excited by this, and I'll admit I've gotten into it as I started cutting the wood.
I have turned a couple of pieces already, frozen a couple for the future, and Richard Raffan turned a piece for Vicki last Friday. A lot of cool people have signed on. The tree's only been down a week.
Let me know if you are interested.
John




