Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Prayer Wheel Finished YES!!!!!!

Posts

Prayer Wheel Finished YES!!!!!!

#1

Prayer Wheel Finished YES!!!!!!

Terry Scott



Well a couple more coats of teak oil and it will be finished

The frame was made with Rosewood

I took this into our club last night and I think at the show and tell everyone may have been suitably impressed as I received many favorable comments. Everyone wanted to give it a spin.

What�s it for was the topic of the night .My reply was its Art it doesn�t have to be of any use for anything l.o.l So It got nick named A nbgfa piece

Allot of work but hopefully you like it .You don�t need to suggest any improvements because I wont be making another

Cheers

Re: Prayer Wheel Finished YES!!!!!!

#2

Steve Kubien

Love it

Steve Kubien

Terry, your perseverence has paid off on this one. Wonderful idea, splendid execution. I'd love to get inside your mind some day, but not without my own protective headgear!

Re: Prayer Wheel Finished YES!!!!!!

#3

Re: Prayer Wheel Finished YES!!!!!!

Ronny Eelen

Congrats Terry!

It's a unique piece, so no need for another one.

Re: Prayer Wheel Finished YES!!!!!!

#4

Steven Antonucci

Sorry, but those are usually in long rows, right?

steven antonucci

Get to work, Terry! I figure at least another 4 or 5 before you are done ;)

great job- love the work!

Steve

Re: Prayer Wheel Finished YES!!!!!!

#5

great!

bob davis

Re: Prayer Wheel Finished YES!!!!!!

#6

Re: Prayer Wheel Finished YES!!!!!!

charlie belden

Very nice looking, very unusual - as usual - piece - with actual movement.

Now if there was just some way to put little "flappers" off the central shaft - and short dowels off the inside of the cylindrical wheel . . .

Do kids still clothes pin playing cards to the front forks of their bicycles so that the spokes make them make noise as the wheel turns?

Or maybe small bells, suspended off the center shaft, dowels dinging them as the wheel is spun?

Now if the center shaft were horizontal - and the inside of the prayer wheel had grooves and textures - and you put rice, or peas, or marbles, or . . .

The finished piece is impressive. Getting to see some of how it was done - a bonus. Your sharing what lead to the idea - priceless.

Once again, thank you sir - for yet another lesson in humility - and for another inspiring piece.

Re: Prayer Wheel Finished YES!!!!!!

#7

Re: Prayer Wheel Finished YES!!!!!!

Terry Scott

Hi Charlie

I always depreciate your input you have a way with words that makes me smile

I think I have to be a bit careful as I dont want any more symbolism in this work More a thats a Terry Scott piece

I had thought of bells hanging on brass chains and sponging over a light Gold hue to the columns

However this is one of those pieces you can continue on for ever with either texture or additional subject matter being added. Maybe time to move on and say enough is enough

Cheers

Re: Prayer Wheel Finished YES!!!!!!

#8

Re: Prayer Wheel Finished YES!!!!!!

charlie belden

Terry:

With all the ideas for pieces that must be stacked up in your head like cord wood before an Alaskan winter I understand why you're anxious to get to The Next One. As always, I look foreward to seeing it, and learning about how it was done, in addition to why.

Re: Prayer Wheel Finished YES!!!!!!

#9

Re: Prayer Wheel Finished YES!!!!!!

Brad Peceimer-Glasse

This is a nice project, but we also make Tibetan Buddhist Prayer Wheels and I was wondering about the mantra's inside the wheel...?

We use microfiche in our wheels, and our smallest wheels contain @50 million mantras, while out largest table top models have 2 billion or more.....