Poly Fill
Bill Hale The Wood Spinner
I sent out a lot of samples of this stuff and have not had much responce. Please let me know what you think about it and if you would buy more.
Am I wasting my time on it?
Knowledge You Can Build On — Est. 1998
Poly Fill
Bill Hale The Wood Spinner
I sent out a lot of samples of this stuff and have not had much responce. Please let me know what you think about it and if you would buy more.
Am I wasting my time on it?
Re: Poly Fill
adrien
I liked it. Did not have the problem John Lucas mentioned. The material did not change size after fully setting. I think it's a useful adjunct to our armamentarium, and I will continue to use it.
Re: Poly Fill
fgvanatta
I am in the process of using it for inlaying cactus skeletons; I'll get back with the results.
Frank
Re: Poly Fill
Philip Duffy
Bill, Thanks for the sample. Just have been too involved with high priority items to turn and little time to apply the polyfill. Will get a report out to you as soon as I get a break. Phil
Re: Poly Fill
Bill Blasic
Bill,
Thanks for the sample. I have a highly figured piece that has a knot off center that I'm hoping your Polyfill will fix. Just been so busy since returning from Provo and I hope to get it done soon.
Bill
Re: Poly Fill
John Lucas
Bill I think it's just going to take a while for people to have the time to play with it. Most people don't have a bowl laying around with a crack or void they want filled. Consequently they have to turn one. Most people don't turn every night. I often go 3 or 4 days without turning due to other commitments.
Now that we have the samples in our hands we will be looking more actively for ways to use it. Everyone loves to try new methods and I'm certainly no different. I'm a tad busy right now photographing American Legion Boys State which eats up about 70 hours of my time this week. Then we have the AAW symposium which I still have to get ready for. After that I'll have time to play again and your product is certainly high on my list.
Re: Poly Fill
Bill Hale The Wood Spinner
Thanks folks I just need to hear something.