Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Durable finish or Not?

Posts

Durable finish or Not?

#1

Durable finish or Not?

neptune1

Im turning a pair of hand grips for my bike out of Indian Rosewood. My dilemma is what or if I should put any finish on them. I need grip so no finish would be good and it would age with some oil on them only, but It would probably get gummy and ugly quick.

Second I idea is to dunk them in epoxy resin or marine shellac or something like this. However if I do this I would have a nice shiny grip but no grip?

Maybe flutting the grips would solve the problem, but Im not that set up for that kink of accuracy. Any suggestions on grippablility and finish would be appreciated. Thnx.....

Re: Durable finish or Not?

#2

Re: Durable finish or Not?

john lucas

What vehicle are you talking about, bicycle, motorcycle, etc. I think a simple oil finish that dries like Walnut oil would be best. If it's outdoors and subjected to the weather and sunlight you will have to renew whatever finish you choose regularly. Hard finishes like epoxy and such will have to be removed to renew them. Walnut oil or boiled linsead oil would simply have to be re applied with possibly a light sanding every so often.

Re: Durable finish or Not?

#3

Re: Durable finish or Not?

Carole Valentine

I would not think wood would be particularly good for bike grips, but if you do want to use it, have you considered texturing the wood to provide better grip and then just using a renewable oil finsh?

Re: Durable finish or Not?

#4

Re: Durable finish or Not?

neptune1

Thanks for the info. Yes, motorcycles use wood grips! I figured that I would turn rings along the grip and leave it at that. Probably use oil ,like suggested, to keep the rich wood color. I remebered that I turned the gear shift knob on my truck and used oil. It really aged nicely with minimal sanding threw the years. Thanks for the input. R Will post pics when finished if I can figure out how?

Re: Durable finish or Not?

#5

Ellis Walentine

Indian rosewood

Ellis Walentine

Interesting problem here. I think you would want varnish to really protect the wood, but varnish doesn't dry very well on rosewood, so you'd have to seal it well with shellac or something else first, maybe vinyl sealer. Whatever you do, I'd suggest a finish with UV inhibitors in it, because Indian rosewood bleaches quite quickly in sunlight. It goes from rich purple to brown to yellowish brown over time.

If you need better gripping properties, consider adding some abrasive powder or finely ground walnut shells or something to your finish.

Ellis Walentine, Host