Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Snarled muscle question? OT

Posts

Snarled muscle question? OT

#1

Snarled muscle question?  OT

Barry Irby

I posted this on the Turning forum because I suspect it is a result of spending too much time standing at the lathe. (Is the lathe too low?)

For many months I have had a snarled muscle in my back between my right shoulder blade and spine. It was a knot and not really painful, but it bothered me a bit. Recently I discovered I can "massage" it by leaning back against a corner of a wall and rubbing it on the edge. Now it is painful but seems to be getting better. Sort of and Ahh! after the pain of working on it. So, the question is, am I actually untangling it or just aggravating it? Stop or keep going?

Re: Snarled muscle question? OT

#2

Re: Snarled muscle question?  OT

Allen Neighbors

Yep, too low. I had these knots 'til I raised my lathe.

My preference over massage: 8 oz styrofoam cup; 2/3 full of water; Freeze; tear away upper half of cup, baring the ice, and leaving your wife a nice padded spot to hold it.

Place it directly over the knot. Hold it still for 30 secs ('til you catch your breath) or so, and then begin drawing circles with the ice, increasing the size of the area by 1/4" or so. Keep drawing the circles 'til the area over the knot is about 4 or 5 inches diameter, and beet red.

Knot's gone. And doesn't come back as quickly as with massage.

Good luck.

Re: Snarled muscle question? OT

#3

Re: Snarled muscle question?  OT

Emmett Manley, Lakeland, TN

You are probably dealing with a muscle spasm which can be relieved by the pressure you are applying. When you do your "exercise" maintain the pressure for at least 10 seconds. And try to relax.

This would work better if you had someone else try to break up the spasm by applying pressure with the heel of their hand.

Good luck.

Re: Snarled muscle question? OT

#4

??? Question ????

Russ Fairfield

Don't you think it might be better to see a doctor than asking a bunch of people on an internet forum?

Re: Snarled muscle question? OT

#5

Re: ??? Question ????

bill crommett

There is nothing wrong with being a cheapskate if you are not endangering your life or health. Remember: "When all else fails, read the directions ".

One suggestion: check to see if you have one leg shorter than the other. You wouldn't have noticed the difference if you had not been standing in one position for long periods of time.

Advise on the internet is worth just what you paid for it.

Re: Snarled muscle question? OT

#6

Mouse and keyboard position, not the lathe

Galen Vetterick

I get more back pain from low keyboard and mouse than I do at the lathe. At least I'll blame that first!

Re: Snarled muscle question? OT

#7

Re: Snarled muscle question?  OT

gary clarke

Russ is correct, you need to see an MD. I could give you at least a dozen things that can cause your problem, however diagnosis over the internet is not the way to go about it.

G Clarke, MD, retired.

Re: Snarled muscle question? OT

#8

Steven Antonucci

Bet you are right

steven antonucci

I get the same pain when I am in the office a lot. It's from sitting at my desk with my feet up and my head craned down. I take an Advil to kill it...

S

Re: Snarled muscle question? OT

#9

Re: Snarled muscle question?  OT

Dave Moore

I've had that very symptom, along with several others.

I could get temporary relief by laying on the floor with a tennis ball under the shoulder in just the right spot and rolling around on it gently.

I got permanent relief (so far - about nine years now) from movement therapy out of the book "Somatics" by Thomas Hanna.

I did consult MD's (two of them) and massage terrorists, sorry therapists, (three of them). One of the MD's referred me to a surgeon for consultation. (I also had pain symptoms in the lower back) and he recommended, guess what, surgery.

The book was recommended to me during an after dinner conversation with the chief of orthopedic surgery at a major teaching hospital, someone I met quite by chance.

By all means get it checked out medically if you wish, but before you agree to anything invasive as a treatment, read that book. Just read it, see what you think.

If you are getting older (who ain't) you cannot just do things the way you always did. We have to stretch daily, and if there's a knotted muscle or some other thing going on, we have to deal with it.

With all due respect to MD's, most of them do not receive much if any training in alternative movement therapies and very few of them have much of a clue what they even are, yet major ballet companies and sports teams all over the world are using them routinely. Anything that helps a world class ballerina ought to be OK for a woodworker I should think, they use muscles we don't even know we've got. :)

Re: Snarled muscle question? OT

#10

We yes but....

Barry Irby

Its a long story, but the last time I went to my Doctor was to get him to send my history to an insurance company to help me get insurance. Since i did not have insurance, he charged me the walk in rate in spite of the fact I have been letting him "manage" my blood pressure for ten years. (Mind you, what they asked for was a "copy of my records") His aide took my pressure and it was the highest reading they ever got. His comment was, Oh, you pressure is not managed. In stead of saying something like lets take a week or two to get your pressure under control and then send in the results, he sent them in. I was declined. Still have no insurance. I am searching for a new doctor. You have to be careful with advice from doctors also. He might have gotten a D or even an F in Back Pain.

Also, I thought I would ask here searching for relevant experience. I am single and unattached at the moment. I have no-one to massage it for me. It has become clear that simply ignoring it is not going to work. Can't exactly use the ice in the cup thing, but maybe and ice pack would help. I sort of stumbled into "massaging" it on the corner. Had not thought of the tennis ball thing. Had not occurred to me it might be the keyboard. (another thing this group has in common with someone accessing the group through the Internet.) I will filter the info and try to use the results with a little wisdom. May read the book. From looking at the mug shots in Wood Central, if I wanted to hide out, I would go stand among the members and blend right in. Lots of relevant experience here. And, I trust this community.

Right now, its self massage and ice until a better idea comes along. Probably will raise the lathe too.

Re: Snarled muscle question? OT

#11

Re: We yes but....

fgvanatta

I've had a similar problem for years. Since it only occurred when I worked on the lathe for a couple of hours, I didn't need to consult an M.D., Chiropractor, Massage Therapist, or Psychic to figure out what caused it. The immediate problem is "how to fix it" or "how to prevent it." There are a lot of answers to "how to fix it" - including Chiropractors, Massage Therapists, Exercise Balls, Tree trunks with heavy bark, and Muscle Relaxants or Pain Pills. Tried 'em all, and they all work to some extent. Better, methinks, to figure "how to prevent it" - which was a simple process of raising my lathe a few inches. Problem solved.

Maybe that's why OP came to this community for answers. If working at the lathe is causing the problem, then it is probably pretty common among those who work at a lathe, and they may know a simple solution. Doesn't hurt to ask. And it's certainly cheaper than going first to someone who will charge you just for asking.

Frank