Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Black Vessels

Posts

Black Vessels

#1

Black Vessels

Mike Foster

Here are some small vessels that I've been playing with. I took Molly Winton's advice and decided to play with a new toy to create textures on a small scale. I recently put together a Graeme Priddle woodburner and these are the result of playing around with it. I robbed ideas from both Molly and Graeme, but was really just playing with the woodburner to see what it will do. I have to say that it is really fun. Something about vaporizing wood in a burst of flame is so satisfying. I like the results as well, but have not really decided how it will fit into the work I like to do. I may just do more of these little guys. They range in size from 2-3" in diam. to about the same in height. In the post on gesso I mentioned that I used flat black wood stove spray paint on these out of sheer laziness. Like I said, I was just playing around. They looked better before I shot them with Fixitiff. Unfortunately all I had was gloss, so the finish is not nearly as flat as with just the paint. I may go back to the flat black, as I liked it better. I think Carole's vessel looks much more refined with the gesso, and may try that on the next one I do.


Re: Black Vessels

#2

Color in photo  ? ? ?

Doc Green

Mike and/or Carole, what is it that gives the color tone in your photos of the black objects, which do not photograph as black. Are they shot on a colored background? Photoshop? Altered white balance on camera?

Just curious. I like it. ~Doc

Re: Black Vessels

#3

Re: Color in photo  ? ? ?

Carole Valentine

Doc, not sure what you are seeing on your monitor. I see a slight pink cast in Mike's photo on mine. Less so but still a very slight cast in my photo. Might be white balance. The only thing I do with PS is crop and adjust the Levels to try and get as true-to-life color as possible. I have found that black is very difficult to photograph.

Re: Black Vessels

#4

Re: Black Vessels

Carole Valentine

Nice pieces Mike. I went through umpteen iterations of finish combinations on practice wood before I finally found one that I was satisfied with. One thing about doing black...you can have absolutely NO dust floating around when it comes to finishing (or photographing!

Re: Black Vessels

#5

Mike, I like 'em

Cyril Griesbach

Re: Black Vessels

#6

Steven Antonucci

Like the rule with cars and trucks...

steven antonucci

Black is one of the hardest colors to keep clean! It shows EVERYTHING.

Good work... I'm also trying to figure out how to work this into my reportiore...

Steve

Re: Black Vessels

#7

Re: Black Vessels

Molly Winton

Very nice Mike! I particularly like the one in the bottom photo, left. It looks like a rattan basket.

Making minis to practice and experiment burning on is a fun way to try this out. It looks as if you had fun. Making the minis can be as fun as the burning...at least for me.

Re: Black Vessels

#8

Re: Black Vessels

Larry

Where can I fine instructions for makeing a Graeme Priddle woodburner?

Thanks

Re: Black Vessels

#9

Re: Color in photo  ? ? ?

Mike Foster

I see no color cast on my monitor. They appear as black on a gray background. I think that my monitor should be correct as I went through the process on calibrating m monitor/screen. I can't remember right now how I went about it, but it would vary somewhat depending on what system you are using. I'm a Mac guy, and have been from the old Apple II's.

Mike

Re: Black Vessels

#10

Re: Black Vessels

Mike Foster

Thanks Molly,

That basket one is also my favorite. I made a similar one that I liked even better but already gave it away.

I do enjoy making the little hollow forms as well. It also becomes more fun once you figure out the little nuances and you get faster at them. One thing I found out the hard way is that you need a little thicker wall if you plan on burning. Yep, went through the wall on a couple. My instinct is to shoot for about 1/16" walls on a little vessel like this, but that is just too thin to burn.

Mike

Re: Black Vessels

#11

Re: Black Vessels

Mike Foster

Do a Google search for Graeme Priddle woodburner and you will get a number of resources including pdf's on how Graeme does it. I saw him demo at Totally Turning and spent a little time gleaning from him how he made his. He used a NAPA battery charger, which you will see reference to on some of the google results, but I had a pretty old one sitting around in the barn not being used which got reborn into a wood vaporizer. I feel pretty comfortable with electrical things, but if you are not, follow the instructions that have been written on how Graeme does it and you should be fine. Have fun (but be careful, don't have your head or face above the piece being burned as it truly does flame up every once and a while).

Mike

Re: Black Vessels

#12

Re: Color in photo  ? ? ?

Doc Green

Thanks, Mike and Carole.

I loaded your photos into Photoshop and used the color picker to sample the color at various points. What I found in both cases is that the red is slightly strong and the blue is significantly weak, compared to green.

For one case I remember, I sampled a medium gray area, and the color numbers were R: 129, G: 128, B: 123. Perfect gray is 128, 128, 128. The numbers varied somewhat from one part of the photos to another, but generally maintained those same proportions.

The shortfall in the blue gives a sort of warm chocolate tone that I find very appealing. Great photos in both cases! Thanks for posting.

~Doc

Re: Black Vessels

#13

Love em all!

Jennifer Indy.USA

Mike these are all really nice. Love the patterns, the textures and the shapes are great too.

Sweet pieces!

Jen