Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

way OT playing in the mud and stuff, long

Posts

way OT playing in the mud and stuff, long

#1

way OT playing in the mud and stuff, long

Mike Foster

I haven't posted much lately, but thought I'd vent a little here. It was a wonderful day here in VT today, so I had a number of outdoor tasks lined up. First on the list was mowing a field that gets really dense if not done regularly and I thought I'd make the first cut today with the brush hog. Mind you this dense grass is over the sludge field that was the result of having our pond dredged 2 yrs ago. All was going so well that I thought I'd get a low lying section. Big mistake. Before I knew what happened, I was in up to both axles and the bottom of the tractor in mud with all 4 wheels spinning nicely in self made mud ponds. After much swearing and numerous attempts at self extrication using planks, rocks and whatever else I could think of, I finally gave in (I just hate to give in) and went next door to my neighbor. With his tractor and my winch, I was finally able to get myself out of the holes I dug. My neighbor is a great guy, he is a German immigrant and not only did he extricate me, but had me bring my tractor up to powerwash all the mud off and then we topped it off with a couple of beers. Kind of wasted a great day, but had a great conversation and got a little closer to a neighbor, so all was not lost.

This past week I spent dealing with 5 16' sugar maple logs that I pulled out of the woods last winter. The trees had blown down 2 years ago, but still were alive because their rootballs were still intact. I had a logger friend haul the logs to another friend that has a nice bandsaw mill. He cut me some flat wood and now I have a stack of wood drying in the field that is about 6 ft tall and 4 ft wide and 8 ft long. No idea what I will do with that much maple(over 350 bd ft of 5/4 maple), but a dining hutch is high on my wifes list. I have been doing some fun turning pieces, and will post pics as soon as I take some. Couple of the pieces I hope to take to the symposium.

Guess I should have posted this in Ellis's Ides of May.

Mike

Re: way OT playing in the mud and stuff, long

#2

Ellis Walentine

Memories of Vermont

Ellis Walentine

I lived in the Upper Valley area for about seven years (Hanover, Lyme, Thetford, etc.) and burned out a Jeep transmission in the same kind of mud you're describing, so I'm aware of the frustration factor. Between the middle of winter and mud season, you sure got a chance to meet your neighbors, as you're pulling your car out of a ditch. If we could stand the cold, we'd be back there for good. Community abounds in Vermont.

I'm sure you'll find a good use for that maple. Sugar maple is very rewarding, and can be quite beautiful, but it takes sharp plane irons to bring out the depth of the grain.

Have fun,

Ellis

Re: way OT playing in the mud and stuff, long

#3

Re: way OT playing in the mud and stuff, long

Bob Macgregor

About the third or fourth poster down in this thread from a TractorByNet forum has some nice pics of a really stuck tractor.

http://www.tractorbynet.com/forums/showthread.php?p=1963208#post1963208

I've avoided that fate this spring.

The owning/operating forum on TBN also had some interesting stories in a thread on tractor embarassments:

http://www.tractorbynet.com/forums/owning-operating/170996-embarrissing-tractor-moments.html

You have lots of company!

BOB