Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Woodburners - What type current?

Posts

Woodburners - What type current?

#1

Woodburners - What type current?

Jerry Klug

I modified a battery charger like Priddle's and have been very happy with the results. One of my club members made one with a Radio Shack transformer that also works for his needs. Mine is diode rectified with a large heat sink and an automatic reseting circuit breaker producing DC to the pen. His is simpler with AC to the pen as there is no rectifier. Both control the heat with a 600 watt dimmer switch. There are some others in our club that want to make their own burner.

The question to someone that understands electricity, which is the preffered system? Or does it metter to the woodburning pen?

Re: Woodburners - What type current?

#2

Re: Woodburners - What type current?

John K Jordan

Jerry,

It's hard to imagine that low-voltage AC or DC would make a difference in resistance heating. I haven't made woodburners but have made several similar devices that used hot nichrome wire and I always used AC current directly from a transformer with the 110v input to the transformer controlled with a rotary light dimmer. I can think of no safety issues with using AC instead of DC at these low voltage levels and low (60hz) frequency.

It is the amount of current through the tip that determines the heat produced in a given tip. Rectifying the AC current with even a full-wave rectifier circuit would actually "waste" a bit of current (hence the need for the heat sinc you mentioned) and require a different transformer for the same heat. BTW, unrectified AC is in some ways quite similar to a rectified AC waveform unless the output is filtered with a big electrolytic capacitor.

The protection circuitry in the battery charger sounds like a good idea on the surface but seems unnecessary to me because these things are operated at nearly a dead short anyway. IF the wiring is sized correctly, an over-current situation would simply burn the tip in two. Since we are knowingly playing with fire and would never leave the thing unattended, that would probably not burn down the house.

I think the biggest value of making one of these burners from a battery charger is you are starting with a sturdy case with the transformer and 110v wiring already safely mounted inside. This is especially important for someone with limited experience. If you build it from scratch from the parts, you have to come up with your own case and take care in the construction to avoid electrocuting someone.

JKJ

Re: Woodburners - What type current?

#3

Re: Woodburners - What type current?

Jerry Klug

Thanks for the info. Those of us with little electrical experience leave our forrays into volt land with more questions to intimidate.

Re: Woodburners - What type current?

#4

Re: Woodburners - What type current?

John K Jordan

Just as with most specialized fields, this one has it's own language, It's sometimes difficult to discuss things efficiently without a common background.

A simple transformer provides AC; rectify that to get DC. With AC, electrons first move one direction, then stop and reverse and move in the other direction (a plot of the voltage appears as a sine wave). For DC, electrons move steadily in one direction (a plot of the voltage is a straight line).

Basically, the amount of current through the tip makes it hot. The direction of the current, AC or DC, should not make any difference in this heat.

Even in this simple application the two are not strictly equivalent since there are other subtle factors to consider, but for this type of device it should not make any difference.

JKJ

Re: Woodburners - What type current?

#5

Re: Woodburners - What type current?

Guy Bratt

It is vitialy important to remember when wiring for DC that if you connect the DC in reverse the heat you create will be distributed upside down.

Re: Woodburners - What type current?

#6

Re: Woodburners - What type current?

Don at Central Illiinois

Wouldn't that make it cold heat?

Re: Woodburners - What type current?

#7

Upside Down Is Spatially Contextual

charlie belden

What's upside down for those living above the equator is rightside up for those living below the equator. So one must qualify those terms as to location above or below the equator ; )

Re: Woodburners - What type current?

#8

A related question

David Walser

Does anyone have a link to an article or tutorial on making a woodburner using a battery charger (or something else)?

Re: Woodburners - What type current?

#9

Re: Upside Down Is Spatially Contextual

John K Jordan

This is a serious issue for those taking their telescope with a motor drive to the opposite upside-down hemisphere. The drive direction must be reversed to track the stars.

I found a great use for my woodburning outfit which has been sitting in my cabinet for a least 8 years. I loaned it to a young girl friend who is having fun playing. So far she's used flat wood but I want her to work on a bowl I made from bradford pear. Here is her second piece, done for a school project, woodburned and colored pencils: