I want one of these. *LINK*
I want one of these. *LINK*
Posts
Re: I want one of these. *LINK*
#2AND The Shop AND Wood To Go With It!
charlie belden
Re: I want one of these. *LINK*
#3
Not going to fit in the garage, I'm afraid...
steven antonucci
Re: I want one of these. *LINK*
#4
Re: I want one of these.
Mike Stafford
You know I saw a similar operation performed by a carpenter from California on some huge redwood beams that were being used in a This Old House project.
That carpenter used a Sears 12" bandsaw mounted on swivel casters and he steered it through very intricate cuts on those beams that were for a pergola. He propped up the beams on ladder rungs that were adjusted so they were the same height as the band saw table.
I bet the 12" Sears band saw is cheaper....
Re: I want one of these. *LINK*
#5Looks like too much fun!
Ruth Niles
After watching that, I saw this one and it's quite amazing....made me laugh at the end.
http://www.youtube.com/watch?v=YXW55S4X9zo&NR=1&feature=fvwp
Re: I want one of these. *LINK*
#6Mount your bandsaw on the Kobra
Dick Coers
Re: I want one of these. *LINK*
#7Me Too!
Scott Burr in Ben Lomond CA
Re: I want one of these. *LINK*
#8
Re: Mount your bandsaw on the Kobra
George Balock
In FWW a couple of years ago, I remember a guy who built a small hovercraft for his bandsaw so he could cut a curve on a long beam. Very impressive.
Re: I want one of these. *LINK*
#9The first captured bar system I ever saw
John Lucas
had a mounting system similar to that bandsaw. I was huge and mounted to the outboard end of the lathe with an elbow almost exactly the same as that one on the bandsaw.



