Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

camera angles when videoing turning demo

Posts

camera angles when videoing turning demo

#1

camera angles when videoing turning demo

Barbara Dill

I've been researching this topic with no results. Does anybody know the best camera location and angles that are used while videoing a demo, and how many cameras are good for 1) showing the audience the demo and 2) making a DVD ? Thanks.

Re: camera angles when videoing turning demo

#2

Re: I suggest that you read the tutorial....

Jamie Donaldson

....that I posted on the AAW site (woodturner.org) under the heading of Chapter Best Practices- Video Support for Demos. That will offer my suggestions, and it was also published in the AAW Journal about 2 yrs. ago- I don't have the specific issue or date handy.

Re: camera angles when videoing turning demo

#3

Re: camera angles when videoing turning demo

John Lucas

Barbara I think one overhead to show the cut happening and to help show the profile of the piece. This one is usually fixed focus and location. It would be great if it had remote zoom and focus but I haven't seen one of those.

The other one should be a zoom camera somewhere off the end. This one is used to zoom out and see the demonstrater and then zoom in enough to see them hollowing a bowl or if they hold a tool up to show the shape, etc. This camera needs to be mobile. A tripod with a quick release is good. Use it on the tripod for most things but when the viewers can't see what's going on then take it off the tripod and put it where they can.

Re: camera angles when videoing turning demo

#4

Re: I suggest that you read the tutorial....

Barbara Dill

Thank you both very much. I don't know how I missed your article, Jamie.

Re: camera angles when videoing turning demo

#5

Re: camera angles when videoing turning demo

Russ Fairfield

I can tell you how I make a DVD.

I am definitely not a professional videographer, so I have no idea what is right or best, but I can tell you what works for me. I do all of my videos alone because that way there is nobody else who wants their 50% share of the sales.

Forget those little overhead cameras for a DVD. The picture quality isn't good enough. I use 2 cameras for a video. One is looking over my right shoulder, and the other is on the other side of the lathe. I will move that one around to get the best viewing picture of what I am doing. I record the sound on only one camera because I only need one sound track. I stop and move whichever camera is needed if the picture needs to be taken from a diffeent angle. That is the only time it would be good to have an assistant.

Since I am doing this alone, there are 2 monitors on the other side of the lathe from me and I can see what the camera sees. I control the cameras, focus, and zoom by hand because that is easier to do than with the remote controls, and I have long arms.

When editing I cut both video and the sound track to get the story line, and then switch back and forth between the cameras for the best picture.

I tried adding the sound later, but the results always sound too recited because I had to read a written script. Doing the sound track with the video makes it more natural for me, and I use a good quality lapel mike for that.

If I were to add a 3rd camera, it would be from my left shoulder, and with that I would never have to move a camera again.

Re: camera angles when videoing turning demo

#6

Re: camera angles when videoing turning demo

Barbara Dill

Thanks Russ. The way you use the camera is the way I use my camera. Our club has a camera secured to the ceiling. I have a hard time understanding that view. When I photograph my turning, I have the camera over my right shoulder and move it to the front when I need to. I am researching this because I, in an insane monemt, voluntered to chair the AV committee. I want to improve the videos we make so that the audience can see more clearly what the turner is doing. I still can not find the article or anything else written about this. So I'll keep looking.

Re: camera angles when videoing turning demo

#7

Re: I suggest that you read the tutorial....

GaryG in MD

We're using Jamie's article for our new setup at Montgomery County Woodturners. Works for us. ...Gary

Re: camera angles when videoing turning demo

#8

Re: camera angles when videoing turning demo

john lucas

Russ What software do you use to make your video's? I bought Pinnacle and find it extremely difficult to use and the book is totally useless. It's why I haven't made any more video's. I think they may put Imovie on my computer at work so I'll try that if they do. Apparently I'm going to have to become a videographer if I still have a job after July.