How Many Times Do YOU Try . . .
charlie belden
How Many Times Do YOU Try . . .
. . . before you abandon an idea - or - modify the idea drastically in order to get the piece done?
While turning a pedestal for the Wishes Box that Jennifer?s Wishes Bowls inspired, it occurred to me that a hidden lidded box in it ? to hide ONE last marble ? might be fun. I like doing lidded boxes so this seemed to be a good idea. But it also would add more risk ? the fit of the lid is easy to blow.
As I began hollowing out the box part it occurred to me that instead of having the hidden marble roll around inside - and give away the secret - I'd make the marble the pupil of any eye that would be staring at you when you opened the box. The marble would sit in a concave hemisphere and the adjacent surface would be a convex hemisphere, rolling down as it approaches the side of the box. That meant turning part of a dome - inside a turned box- that's about 2" in diameter.
Well it's easy to turn a bead - on the OUTSIDE of a piece ' so it shouldn't be all that hard to do part of one - INSIDE the box - right?
WRONG-O, WRONG-O.
The tricky part of rolling a bead is near the end of the roll, when the tool goes from basically horizontal to basically vertical - up against an adjacent surface. That's where The Dreaded Spiral Cut lurks, waiting to cause a GOTCHA.
Must've been a small army of Dreaded Spiral Cuts hiding in this piece of wood. And they seem to collaborate with The One Last Cut demons - to maximize the damage they can wreak.
Recovering from a Dreaded Spiral Cut attack requires reducing the size or shape of the bead ? or in this case - half of an eye ball - inside a small box. And that meant getting the eye ball deeper in the box - where there's even less room to maneuver the cutting tool.
So after FIVE attempts - and five Dreaded Spiral Cuts - I'm seriously considering abandoning the Eye Ball idea and just hollowing out the box so I can finish turning the pedestal.
But my Little Voice keeps saying things like "If you painted the eye ball, maybe do some little red veins too - the surprise effect would be so cool!?" And I keep saying "But I could ruin the piece!". This Craftsmanship of Risk thing thing is a royal PITA.
When YOU are faced with a situation where the Craftsmanship of Risk Factor threatens completing the piece - do YOU go for it and keep trying - or - at some point are YOU more sensible and chose a simpler path to your destination?




