Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Spalted Maple and walnut with Blackwood accents.

Posts

Spalted Maple and walnut with Blackwood accents.

#1

Spalted Maple and walnut with Blackwood accents.

Toney Robertson

First time a did an inside out turning and I thought a finial would be a good place to start. Blackwoood inside the finial and on the tip of the spear.

11 1/2" x 10 1/4" - AO finish

All comments and criticisms welcome. If you don't like something tell me and why.


img

Re: Spalted Maple and walnut with Blackwood accents.

#2

Pic 2 

Toney Robertson


img

Re: Spalted Maple and walnut with Blackwood accents.

#3

Re: Spalted Maple and walnut with Blackwood accent 

Toney Robertson


img

Re: Spalted Maple and walnut with Blackwood accents.

#4

Re: Spalted Maple and walnut with Blackwood accent 

Toney Robertson


img

Re: Spalted Maple and walnut with Blackwood accents.

#5

karl jr

Re: Spalted Maple and walnut with Blackwood accent

karl jr

Imagine. I broke about a dozen inside-out ornaments before I saw one finished. Very nice job. And with texture to boot!

Nice curves. Sharp lines. Nice balance between height and width.

Keep up the impressive work!

Re: Spalted Maple and walnut with Blackwood accents.

#6

Steve Kubien

Re: Spalted Maple and walnut with Blackwood accent

Steve Kubien

Since you asked for comments.... I think the finial has real possibilities I like the little top, well, on top! I think the base of the inside-out works just fine. I really do not like the lid. It's way too big and the because of the colour, it dominates the piece. That's a nice piece of spalted maple you've got there but you need to go looking for it around the lid.

I think I like the added texture, but maybe not the location of it. I wonder what a ring of it would look like on the top of the form instead around the edge...

Lots of potential and obvious skill went into this. Aren't hollowforms fun?

Re: Spalted Maple and walnut with Blackwood accents.

#7

Barb Siddiqui

Re: Spalted Maple and walnut with Blackwood accent

Barb Siddiqui

That seems to me a really great finial! I like the delicacy of it, and the wood combinations. I'd like to see the vessel the same wood as the lid, for the eye to flow upward through the remarkable finial more smoothly. I think the width of the lid is fine, and provides a 'base' to show off the unusual finial. Very nice.