Not being a video guru, I need a little help. Finally, our chapter has raised enough money to buy a decent video system for our monthly meetings. We would like a projector and screen along with 2 or 3 video cameras with remotes for controling zoom.
After searching the web and stores, I am thoroughly confused. Anyone got any suggestions as far as makes or models that are working for you? Thanks in advance for the great help as usual.
....to the AAW woodturner.org site and find the tutorial for video support I have posted under Chapter Best Practices. I will be glad to assist with specifics since some of this equipment changes almost monthly.
I am the video guy for the Northeast Wisconsin Woodturners. The setup we use we have had for a number of years & seems to work well for us. We use 2 Sony camcorders, one as an overhead & the other on a tripod. Both camcorders go to an A-B switch which in turn go to a Panasonic DVD recorder so we can record the demo right on to a disc. From the recorder the video goes to a Mitsubishi XD520U projector, which shows on a Da-Lite floor standing screen. For the audio we use a B-52 Matrix. It's a unit that comes with 2 speakers, & an amp. We added a Sony cordless mic to round out the system. All you need is a bunch of wire to connect everything together & you are ready to go. I hope this gets you going in the right direction.
... a favor by sharing your info and expertise. I don't attempt to keep up with all the evolution of equipment that changes almost daily, and I've been retired from the business for 7 yrs. now.
In my personal opinion, I like to use at least 2500 lumens for any presentation room, the further you are from the screen the less bright the picture becomes.
For most of the University classrooms we use a 4500 lumens machine that has LCD drive. The reasoning behind this is the DLP projectors can not produce a good yellow, it ends up being gold or mustard color.....which I am sure the Powermatic guy would love, but the school who has blue and yellow for colors, not so much.
Good screens also make a difference. Draper and Da-Lite are the 2 main screen manufactures we use. They are both in Indiana so they are good for the local economy. They have a vast assortment of screens to please anyone, from permanent mounted to portable and in MANY sizes.
For our purpose of demonstration, a tripod screen with a fiberglass backing in white would be the best choice. STAY AWAY from the MYLAR screens, they rip too easily.
STAY AWAY from GLASS BEADED screens, they can not be washed, if you do, you rub the glass beads off the screen.
A good projection stand would also be a good investment, luckily, most cart manufactures have it down and there arent many bad carts.
I have installed many systems over the past 20 years, they can be as simple as a projector on a cart with a dvd player and sound support, or as complex as 2 projectors ceiling mounted, with 4 TVs, 5 cameras, Polycom video conferencing, video switching, scaling and conversion, all controlled by Crestron touch panels.
The one thing that can ruin ANY install are bad cables.
You do not have to buy the latest oxygen free super duper twisty cable to get good performance, but dont buy the cheapest cables you can find.
I have to field terminate and trouble shoot often and cables are always suspect...especially if I didnt make them, LOL.
I would be happy to answer any questions any one has about the projectors or screens. I hope this helps a bit and I am welcome to any emails .
...have dropped in price, a very nice 42" or larger viewing system could be set up for less money than a digital projector, but not for a large audience. The TV would be more difficult to move unless a permanent wall mount type location is available, and they don't have as wide a viewing angle as a projector on a large screen.