Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

WISH Box Idea - Part Two - Go With The Flow

Posts

WISH Box Idea - Part Two - Go With The Flow

#1

WISH Box Idea - Part Two - Go With The Flow

charlie belden

Go With The Flow

Ya ever have a piece you were supposed to make? And as you make it - it develops a mind of its own? And you go with the flow - not knowing where it'll take you?

Jennifer's recent posting of some of her neat Wish Bowls triggered an idea. Combine her idea with a Drozda type lidded box that had a concave base. Put a small ball in the concavity of the lid and a few more inside - and they can roll around as you handle it. Take the lid off and you can get the balls inside the "box" to also roll around - slow or fast - you decide. Hold the bowl and rock it - and the balls inside will roll back and forth. If you rock it right, the balls will spin into "orbitals", rising up the side of the bowl the faster you move it.

So I "drew up" the basics of this thing in a primitive CAD program and a week ago I posted the illustration here just to throw out an idea. No good deed going unpunished, it was "suggested" that I actually make one - like THAT was going to happen. I had access to a laser engraver and THAT was going to fill my To Do List for a while.

But sometimes The Universe seems to change one's priority list.

I'm out in the shop "rearranging things" to work on the low relief "carving" samples I'd lasered ( "rearranging" involving cleaning off some bench top surface area to put the samples on. If your shop is like mine, you know that this means making space for the stuff that has to be moved, which, in turn means moving other stuff to make room for the stuff you have to move, which, in turn means moving . . .).

During the "rearranging" process I found a hollow form I'd started - and abandoned due to a crack that developed in the rim.

Hmmmmm. I'd only hollowed right around the rim so there was plenty of wood below that.

Hmmm. If I turned off the top part - I could make it into a flat topped rocking bowl. I'd already done a flat topped, undercut rim bowl

Hmmmm.

And one thing has lead to another - The Universe / Muse. I'd already done a flat topped, undercut rim bow, "why not add THAT idea?" the Muse asked.

Some reshaping, some undercutting, some hogging out the middle a bit. And as long as I was undercutting, why not turn concave "steps" up the inside for the balls to roll in?

As luck would have it, a former Significant Other had made me a small leather pouch - with marbles in it - fearing that I might Lose My Marbles otherwise. And, as luck would have it, I'd kept it all these years - AND knew where it was. MARBLES!

It seems that listening to your Muse works - at least so far - see!


Here's where I think The Muse will be going - or not.


As another indicator that The Universe / The Muse is to be listened to - I bought two sets of the Tekna Tools turnable plastic jaws - a year or so ago. Never used them - 'til this idea required them. NOW I understand why I "had to" get them ; ).

Re: WISH Box Idea - Part Two - Go With The Flow

#2

Glad you didn't loose your marbles!

Scott Burr in Ben Lomond CA

Very cool, I think :D I like the troughs to hold the marbles. Lookin' more and more like a Roulette wheel. Well kindasorta ;)

Re: WISH Box Idea - Part Two - Go With The Flow

#3

Re: WISH Box Idea - Part Two - Go With The Flow

Jennifer Indy.USA

Charlie you are on a roll. I seem to remember a picture of a bowl that somebody made from years ago where they had shiny ball bearing about 3/4" in diameter trapped inside a groove like what you've made here. It was trapped though and couldn't come out and it was one solid piece. I never could figure out how it got in the groove? Anyway, your sketches reminded me of it.

Re: WISH Box Idea - Part Two - Go With The Flow

#4

Re: WISH Box Idea - Part Two - Go With The Flow *LINK*

charlie belden

I'm fairly sure the piece you saw was by Siegfried Schreiber, a German turner who does kinetic pieces. If you go to the attached link and click on "Blooms_Page82.pdf" the pdf file has a detail shot of the rim of a bowl with a trapped in a groove ball bearing. I found his stuff while looking for other turnings with actual movement. The pdf file is in German and I don't read German so I don't know if there's an explanation of how he traps the ball bearing in the groove. Maybe he steams the wood to make the sides of the groove flex enough to insert the ball bearing.

It's funny how we see things, file away the ones that are interesting, then have them influence us years later, often subconsciously. If you click on "Works" and then click on "Meditation Objects" on the resulting page - you may find that he also influence your Wishes Bowls

I considered trying to "trap" the marbles in grooves but wanted them to be able to change "rings /orbitals" similar to the way electrons change their orbitals as their atom gains or loses energy.

The trapped grooves idea, with openings in each one that would allow a marble to enter or leave a "ring" could add a Puzzle element to the idea. Stagger the openings and have the objective be getting ALL the marbles in the highest "ring". To make it more interesting, require that the lid remain on while trying to solve the puzzle so you have to use sound and touch to determine where things are inside.


Siegfried Schreiber - Kinetic Turnings

Re: WISH Box Idea - Part Two - Go With The Flow

#5

Re: WISH Box Idea - Part Two - Go With The Flow *LINK*

charlie belden

I took the liberty of using a photo of three of your Wishes Bowls in the web page I put together on this Wishes Box piece to show how the idea came about. Hope that's OK with you. If not, I'll remove it.

Now I need to go and try to finish the lid and finial, THEN the bottom of the "box".

This turning thing sure is interesting.


web page on this piece