Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Date coding a piece.

Posts

Date coding a piece.

#1

Date coding a piece.

Allen Neighbors

Can someone suggest a good way to code the date on the bottom of a piece, so that when it comes back around a few years later, you can know exactly when a piece was finished?

I've found that people don't want to purchase a piece that's dated a year or so ago, even though they ooh and aah over it. A true Julian date is way too many numbers.

Thanks, in advance for any good suggestions.

Re: Date coding a piece.

#2

Re:I confirm that time dating.....

JamieDonaldson

...a piece can be a disincentive for purchase to some lookers, so my code is very simple. 10(for year)-99( number of piece made during that year) I then have a logbook which is numbered in the same way, but includes material and short discription (maple burl-natural edge bowl), date completed, size, price, date and location soud.

Re: Date coding a piece.

#3

Re: Date coding a piece.

Barry Irby

You could assign a letter code. "A" could be 2010. "B" could be 2011 and so on.

The the second letter could be the month. So AA would be Jan or 2010. This type of code is used on a lot of equipment. Many of them skip the letter I because it looks too much like a one.

You could also assign something like a "dot" code. One Dot equals 2010 and so on. This gets tedious trying to count the dots.

You could also use grooves in the bottom. No grooves equal 2010, one groove equals 2011.

Actually, You only need a couple of years. The Mayan Calendar ends in 2012. I just knew somebody was going to do something to cheat me out of my Social Security. I'M sixty.

Re: Date coding a piece.

#4

Re: Date coding a piece.

Dick Coers

From watching Antique Roadshow, I see that pottery companies and silversmiths use letter codes. You could start 2010 with the letter A, 2011 letter B. If you want to add the month, I would use a number, like 5A, for May, 2010. Since we are at a decade break on the 10's, it might not be too tough to remember. You could also use the Chinese calendar. 2010 is the year of the tiger. It's also year 4707 so that could also be a code.

Re: Date coding a piece.

#5

Re: Date coding a piece.

Stuart Johnson

Pick a year you will remember like the year you were married then add the current year. For example I was married in 1973 so if I finished a piece on 5/5/2012 the numbering would start off as 85 (73+12). If you want to include the month and date then it would be 850504. To stay away from it looking like a date, enter it as 850-504.

Re: Date coding a piece.

#6

Richard Allen

ALlEN neIGHBORS

Richard Allen

ALlEN neIGHBORS

A = space

L = 0

E = 1

N = 2

I = 3

G = 4

H = 5

B = 6

O = 7

R = 8

S =9

GAHANLEL = 4 5 2010

That should be easy to remember and coded enough that no one is likely to befuddle those who don't know. If you don't like Allen Neighbors pick an 11 character word without repeating characters such as "republicans".

Re: Date coding a piece.

#7

Re: Date coding a piece.

Carol Reed

Why, Barry, I didn't know you were Mayan! :D :D

Re: Date coding a piece.

#8

ReOOps- that last word should be "sold."

JamieDonaldson

Re: Date coding a piece.

#10

Re: Date coding a piece.

John Leonard

I assign a serial number, e.g. 426 and log it in my log book along with the date completed, finish, size (diameter and highth) and what I did with it, sold,gift, wife claimed etc. I tried dating and coding the date and have found this to be the easiest way. Only I know the approximate date made by looking at the serial number. John L.

Re: Date coding a piece.

#11

Re:I confirm that time dating.....

Bill Neddow

I have been using this system for 12 years. It works well.

Re: Date coding a piece.

#12

WOW!!

Allen Neighbors

What a bunch of intellects this site has!!

I understood all of the suggestions, believe it or not. But Richard's took some head scratching.

Richard, have you ever had a military cryptology clearance? :D Surely, you're not old enough to have been involved with 'enigma'.......

I really do appreciate all the suggestions. They've given me something to contemplate, for sure!!

Thanks to all of you. :)

Re: Date coding a piece.

#13

Richard Allen

Re: WOW!!

Richard Allen

Back in nineteen hundred and seventy three I worked as a stock clerk in a clothing store. They used a similar code on the tags which indicated the cost of the clothes so they could provided "discounts" to preferred clients without selling clothes below cost. I recall the key word they used was firehouse. But I recall this wrong as there are only 9 letters with a duplicate giving only 8 digits. However your name works out great for 10 digits and a space (or a slash or a decimal point).

Funny how we are the sum of our experiences.

Re: Date coding a piece.

#14

Re: WOW!!

Jorge Casta�eda

Allen,

Long time ago, I stopped dating my pieces, instead I did switch to a serial number, and every year I have a small notebook where I write description of the piece, date of completion, and date sold.

It is a lot easier than writing a date and most people never will get that that piece that they are caressing so lovingly is a stale one, made the year before last.

The thing I must improve is the little notebooks, I sold my old van and a number of them went along with it...

Re: Date coding a piece.

#15

Lost notebooks...

Allen Neighbors

Oh, No! Lost notebooks... that's as bad as me losing all the information on six years of numbered, bandsaw boxes... when my first computer died.

Take care, Jorge. Maybe we'll meet again, sometime, at another turnfest.... :)

Re: Date coding a piece.

#16

Re: Date coding a piece.

jim miles - Charlote NC

I use year & month such as 0510

In ten years I think I have had 1 0r 2 people ask what it means

I don't think most potential customers recognize what it is

Re: Date coding a piece.

#17

Re: Date coding a piece.

Juergen

I find using a Julian Calendar the easiest. The serial generated from the calendar is created by combining the year and the day of the year. For example the Julian date for today would be 10125. If you produces 5 pieces today add the serial 1 to 5 e.g. 10125-1, 10125-2, etc..

Needless to say keeping track if the serials including information such as: Serial, Item, Category, Wood Specie, Description, Height, Diameter, Price either in a ledger or spreadsheet is essential.

Re: Date coding a piece.

#18

Re: Date coding a piece.

Juergen

It seems the Sample Julian Calendar I uploaded disappeared overnight. I'm unable to edit the original post so here it is again.

Re: Date coding a piece.

#19

Re: Do You Have a Jewish Friend

Frederick Nelson

Today (5 May 2010) would be 21 Iyyar 5770. How you'd shorten that I don't know.

Fred

Under clear skies in Eastern Missouri