Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Ryobi WL-37

Posts

Ryobi WL-37

#1

Ryobi WL-37

Don Thur

Looking for some information on a Ryobi WL-37. I read that the spindle size is 3/4" x 16TPI but it doesn't look that to me so am requesting others to enlighten me. I bought this lathe as a gift for a young starting-turner so I will outfit him with faceplate etc. Before I go buy some attachements, I want to be sure they will fit. Also the rail is not centred so need a bit of advise on how to adjust it to true. Naturally there is no instruction information with this 1991 model.

Any help/advise is appreciated.

Don Thur

www.knotsburls.com

Re: Ryobi WL-37

#2

Ken Vaughan

Re: Ryobi WL-37

ken Vaughan

I used one of those for several years and have the motor unit in the garage for a "beal buffer" Junked the rest out --

3/4 by 16 was used on this, the Taig (think Bonnie Klein Lathe) and the Sherline lathes. I have Taig metal lathe setup so it was easy for me.

MT1 Headstock and Tailstock I got a MT1 Oneway Live center which worked very well. The "banjo" and tool rest were pretty light and I improvised to use 5/8 shank tool rests.

Taig sells a blank arbor

1130 $4.15 Blank arbor 1.00" dia. screws directly on spindle (may be machined for special jobs)

I got them from http://www.cartertools.com/price.html

They also sell a ER-16 fittings

Talon Chuck and the PSI Barracuda 2 will fit this thread also.

Reasonable cheap lathe for learning --- but not anywhere near as solid or as steady as a Midi lathe

Re: Ryobi WL-37

#3

Richard Allen

Re: Ryobi WL-37

Richard Allen

Way under powered.

Penn State has many MT1 and 3/4x16 accessories like centers, faceplates and such.

Pen making supplies would be a GREAT addition, Mandril, pen press, drilling jig, pen mills, a set of sample pen kits.

That lathe used for mandrill projects is terrific and you can easly make enough money with pens ans such to pay for the activity.