Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Oak Bowl and lots of Sharpening

Posts

Oak Bowl and lots of Sharpening

#1

Oak Bowl and lots of Sharpening

jake Niedling

Decided to rough turn a couple of bowl blanks that were getting in my way. One 10" cherry and 14" oak. The oak blank was sure hard on my bowl gouge edges. I used all 3 of my gouges and needed to sharpen them 4 times to get it done. The cherry bowl was a breeze with only on sharpening. The oak blank was from an old tree and was only moderately wet. It was a tough old bird. It is just interesting how different the woods are to turn and sometimes the same kind of wood can be very different at times. I did succeed!

Re: Oak Bowl and lots of Sharpening

#2

Re: Oak Bowl and lots of Sharpening

GaryG in MD

I had a piece of fresh walnut that I thought would be a breeze.

working on the outside of a 12-inch bowl, I ended up sharpening once per pass -- with a Doug Thompson A-11!!

Must have been full of silicon or something...

Talk about a box of chocolates... ...Gary

Re: Oak Bowl and lots of Sharpening

#3

Re: Oak Bowl and lots of Sharpening

john lucas

Jake Reminds me of the time I decided to turn barn wood. I would get barely one pass over the 5 1/2" blank before the tool would be so dull it wouldn't cut. After 3 or 4 passes it would be back to almost as soft as good oak. I can only guess that it was the sand and other abrasives that get in the wood over the years.

Re: Oak Bowl and lots of Sharpening

#4

Steve Kubien

I hate oak.

Steve Kubien