Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

New To Me Anyhow

Posts

New To Me Anyhow

#1

New To Me Anyhow

Ken Oakley-Sunny St. Cloud, Fla

This may not be news to others but I have found out something interesting to me.

I scavange local woods either by driving around, or following the sound of chainsaws or in the case of Camphor trees, follow the smell. I then cut the wood to pen blank size and sell them on Ebay and other sites.

To add a little variety to my inventory I started cutting some blanks cross grain. Problem is many of them would warp or split in drying.

A few years back I salvaged some Sycamore and quarter sawed it to get the snakeskin grain. I posted a picture here on WC and Steve Antonucci posted a comment that the snakeskin would fade very quickly unless I ammonia fumed the blanks. I fumed a batch and after a day or so of fuming I put the blanks on racks to dry. After a few days the blanks felt dry. Seemed to me they dried much quicker than before fuming.

I thought about this when I was having the problem with the warping and splitting of the cross cut blanks. So I fumed some. Again after a day or so I put them on a rack to dry and the warping and splitting reduced greatly. Now I fume all my blanks and can have blanks I cut from wet logs dried,listed for sale and shipped in a matter of a couple of weeks.

My thought is, if it works on pen blanks why wouldn't it work on bowls, platters, vessels, etc?

Re: New To Me Anyhow

#2

Re: New To Me Anyhow

Jim Canning

I have never heard of ammonia fuming, but i would be willing to try it. How would one go about finding more info about it?

Jim

Re: New To Me Anyhow

#3

Re: New To Me Anyhow

Carole Valentine

I think I have only heard of it to darken the sap wood on walnut...at least I think it was walnut. Did not know it would do anything to sycamore. I have a popcorn bowl of sycamore about 5 years old and the "snakeskin" is still there. Hasn't changed a bit and that bowl gets used a LOT!

Re: New To Me Anyhow

#4

Re: New To Me Anyhow

Ken Oakley-Sunny St. Cloud, Fla

I have a plastic bucket,(3 1/2 gal), that I put a smaller bucket inside of. Add about one inch of clear ammonia in the bottom of the larger bucket, put the pen blanks into the smaller bucket, then put the lid on the larger bucket. Leave it closed for at least 24 hours. As I said it seems to help reduce warping and cracking in the pen blanks. Of course they are only 13/16" sq.

I have used the method on Camphor, Citrus woods, pecan, podocarpus, Japanese plum, and cypress, chinese elm, and black walnut.

Re: New To Me Anyhow

#5

Re: New To Me Anyhow

Russ Fairfield

Fuming with ammonia is most common with Red Oak, and for the color. It is how they got the dark golden brown coloring in oak furniture in the Arts and Crafts era. They used to fume the entire lobby of banks and offices after the interiors were completed. It can also be used for accenting the grain in other species as mentioned by others.

This is the first time I have ever heard that it would stop cracking and warping, or make the wood dry faster. I suspect there may be a lot of wishful thinking going on with that.

Blue print ammonia works best for fuming large pieces. Household amonia is too weak to do much good for large pieces of wood.

Lye can be used to darken Cherry and bring out the red in Mahogany.

I don't know of anything that darkens the sapwood of Walnut very effectively, but I wouldn't be surprized to learn of some ancient recipe for doing that.

Re: New To Me Anyhow

#6

Re: New To Me Anyhow

Scott Hurley in N VA

Ammonia fuming is how Gustav Stickley got that wonderful patina on the quartersawn oak for his mission-style furniture. Again, regular household ammonia won't work very well, and I'm not sure what type they used. I've seen it demonstrated by putting a chair in a large plastic enclosure and setting a bowl of ammonia inside. I believe the furniture maker let it sit like that for about 24 hours. After that, a quick coat of wax and you're done.

Scott

Re: New To Me Anyhow

#7

Re: New To Me Anyhow

Bill Turpin in WNC mountains

Ken: please send me your e-bay seller name. I like to buy from people I recognize.

Re: New To Me Anyhow

#8

Re: New To Me Anyhow

TL

White oak, not red oak

TL

Re: New To Me Anyhow

#10

Re: New To Me Anyhow

Bill Turpin in WNC mountains

I got it and placed three bids. Thanks

Re: New To Me Anyhow

#12

Steven Antonucci

Maybe similar to DNA soaking?

steven antonucci

I use to fume with household ammonia a lot. It works pretty well, but it takes a lot longer. Some pieces I would leave under the tent for a couple of days, and they came out A&C proper. I looked into blueprint ammonia, which is 26% vs household (4% maybe?), and the risks and MSDS scared me into waiting a couple of days.

I can tell you that the shop would fill up with fumes that weren't pleasant, but easily dispersed by opening a door and a window. The anhydrous (blueprint) would supposedly eat your lungs if you breathed it, so I don't think I'd want that in the shop.

As far as magical drying properties, I don't think I ever mentioned it. I can see how the ammonia MIGHT displace some of the surface water in a small blank, as most of the stuff I fumed went in about 1/8". If it works, it is certainly cheap enough, and probably makes the blanks look better for sales... why not?

steve

Re: New To Me Anyhow

#13

Fume to Keep QS Figure?????????

Barbara Gill

This certainly has not been my experience. We have a kitchen table that is made from Qsawn Sycamore complete with "snake grain". It is over 13 years old and the grain pattern has not faded a bit. It is finished with a penetrating oil that has no color added.

Re: New To Me Anyhow

#14

Re: An old technique you may want to try

Russ Fairfield

Something you may want to try. It is guaranteed to work, and your bowls will have a "natural" essence.

In days of old, long before the automobile was invented, there were a lot of horses everywhere, and there was a pile of horse manure behind every building. Turned and carved green wood bowls were buried in the manure pile over the summer to give the wood color and prevent it from cracking as it dried along with the horse manure.

I guess it must have been the ammonia that did it.

Re: New To Me Anyhow

#15

Re: New To Me Anyhow-Clarification

Ken Oakley-Sunny St. Cloud, Fla

There seems to be an impression that I think woods should be fumed to keep the grain from fading. All I said was Steve reccomended I fume the Sycamore. I figured he was/is smarter than me. Whether it works or not I do not know because as soon as I can I ship the pen blanks I cut out to make some money. I have never fumed anything but the pen blanks.

It just seems to me that the fuming does reduce the warping and splitting of the blanks in drying and the drying time is also shortened. I have no idea if it would work on a turned item, and maybe wishful thinking on my part as stated by Russ. But figured if it does work it would help keep some masterpieces out of the woodpile.

Re: New To Me Anyhow

#16

Re: An old technique you may want to try

Ken Oakley-Sunny St. Cloud, Fla

I use horse manure in my witches brew of beer and MiracleGro to spalt wood. It works. I can spalt some woods in as little as 3 months.

Re: New To Me Anyhow

#17

No, I Understand that Steve Told You This

Barbara Gill

Re: New To Me Anyhow

#18

Re: Maybe similar to DNA soaking?

Wally Dickerman in Arizona

In reply to your last sentence, it seems to me that if the affects of fuming only penetrated a pen blank 1/8th inch, then the pen turner is going to turn it all away. IMO you've cheated the buyer.

Wally

Re: New To Me Anyhow

#19

Steven Antonucci

Absolutely true...but maybe not?

steven antonucci

If I had a fumed blank that looked great, I might be inclined to rough out my blank and refume it. You will definitely cut away the fumed part in a typical pen blank, but how many pen turners have ever fumed their finished pens?

I'd market it as a way of stabilizing the blank, not the finished product...

Steve

Re: New To Me Anyhow

#20

Steven Antonucci

I probably didn't say it at all :-)

steven antonucci

But that's OK.

I've only fumed wood to darken it, never for drying. I used DNA to dry, but I can see where perhaps ammonia MIGHT help migrate moisture out. Honestly, nothing but a guess...

As far as fuming sycamore, I have and it pops the ray fleck much like QSWO. You have to wait a week or so for the ammonia to evaopate, or it messes up your finish. I haven't done a QSWO piece in 10 years, but I remember that lesson well...

steve

Re: New To Me Anyhow

#21

Steaming it

Jorge Casta�eda

Russ,

I never done it myself, but remember other fellows to mention they steamed the boards, furniture makers, to blend the sapwood with the heartwood. I personally like the contrast between sap and heart woods, so I never done it.

If steaming it works boiling it should do too.

Re: New To Me Anyhow

#22

Re: New To Me Anyhow

John Jordan

The only real way to tell is to do a batch with fuming, and one without, and really divide the wood evenly, so the samples are as identical as possible. Doing wood from different trees at different times makes it pretty subjective. I'm skeptical, but always interested. :) Let us know.

Anyone thinking of trying this, ammonia is REALLY nasty stuff. Be careful. It does make some nice color on some woods.

As far as quartersawing, that's not really necessary, as the quarter grain will show in the cylinder, or square for that matter, no matter how the first saw cuts are made.

John

Re: New To Me Anyhow

#23

Re: I probably didn't say it at all :-)

Barbara Gill

Yes, but you do not need to fume the wood to retain the ray fleck.

Re: New To Me Anyhow

#24

Steven Antonucci

Agreed, never said you did...

steven antonucci

but the fuming seems to have an effect on the wood, and not the rays, thus "enhancing" the look and making the rays pop. They are going to be there one way or another, fuming just makes them stand out more.

BTW- I suspect that you could also fume cherry with some success. Never tried it though...