Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Cautionary tale from last night

Posts

Cautionary tale from last night

#1

Steven Antonucci

Cautionary tale from last night

steven antonucci

Last night, I was demonstrating the proper use of a skew (99% of the time, it's the 1% that matters) at the New Jersey Woodturners meeting.

We have a handful of mini lathes that go on Workmate knockoffs from Grizzly. Certainly, not the optimum setup, but magnified by my overall lack of experience on this configuration. During most of the demo, I would ask for the person closest to the headstock to "hold on to it" for me to help steady it.

My particular situation was caused by the sum of about 4 little things that very quickly became a big thing. Firstly, the setup was "flexible", so I had things moving a bit. Secondly, the spindle height was much higher than I am used to, which forced me to alter the way that I work. Thirdly, the crowd was asking questions and I was not 100% focused on what I was doing. Lastly, the lathe itself was not my normal lathe which caused me to start the downward spiral.

So what happened?

I was making a planing cut with a skew (freshly sharpened and honed to a razor's edge). Since I was working on a mini lathe, I had a 4" tool rest and I was stretching it for everything it was worth- while trying to explain to the crowd- when I ran out of toolrest. The skew, no longer supported by the toolrest caught (of course) and pushed back and downward through my left hand, cutting me along the right side about 3/4" long and 1/4" deep.

I suppose that I was lucky that the cut was at a steep angle and only the outside of my palm, or it would have probably required some stitches. The good news was that we had a first aid kit available and folks immediately ran to get it while I kept pressure on it. In the end, it was a lesson in demo prep for me, as well as thinking about a contingency plan for what needs to happen when an accident occurs.

I am fine, and my cut is only slightly bigger than a boo boo, but could have been much worse if not for pure dumb luck. Make sure that your club has a plan for such types of accidents, and that someone knows the plan and is present at every event.

Steve

Re: Cautionary tale from last night

#2

Re: Cautionary tale from last night

Matt Overton

First, I am glad you are OK. Second, thanks for the reminder. We need to have this plan every time we turn on the lathe at home as well.

Re: Cautionary tale from last night

#3

Steve Kubien

Re: Cautionary tale from last night

Steve Kubien

Glad it wasn't worse and that you're ok. So, you didn't say but how many folks ran home to sharpen their skew after the demo?

Re: Cautionary tale from last night

#4

Re: Cautionary tale from last night

charlie belden

When that little voice in the back of your head is saying "THIS AIN'T A GOOD IDEA!" it's best to listen and take stock of why.

So much of turning is muscle memory and routines. Think it - do it. But change any part of the familiar context and that muscle memory and that routine can become The Enemy. Sharing your unpleasant experience may spare others some grief - and blood loss.

Much appreciated.

Glad you're OK.

Re: Cautionary tale from last night

#5

Steven Antonucci

Black magic demo

steven antonucci

A combination of voodoo, slight of hand, and ancient rituals... dark arts, for sure!

My goal is to get folks to understand the what, how and why... whether they ever partake is up to them. I suspect they will all have walked away with something from last night, even if it only "be careful"...

Re: Cautionary tale from last night

#6

I haven't tried that yet

Mike Foster

Never sliced myself with a skew, but it's only a matter of time. It was good that it was minor and your group was well prepared. Another tale to relate to our newly forming group (yet to become a chapter)

mike

Re: Cautionary tale from last night

#7

Steven Antonucci

Second time for me

steven antonucci

First time was in David Ellsworth's workshop, reaching carelessly toward the tool rack...

The most important thing to relay is that it can happen to ANYONE, from a first time turner to an experienced pro... sharp metal doesn't care which one you are.

Be careful out there.

S

P.S. I decided to upload the picture after taking the Bandaid off because it wasn't too gross. if you look at the cut closely, you'll see a sliver of skin about 1.5" long perpendicular to the "cut". Overall, I think I caught the full 1" wide edge in my hand before it twisted it 90 degrees and out to the right. The cut is deep but at an angle or it would have been much worse...

Re: Cautionary tale from last night

#8

Re: Beware the taming of the skew!!!

JamieDonaldson

Re: Cautionary tale from last night

#9

Re: Cautionary tale from last night

Keith T

Hey Steve, Glad you're OK. I've got lots of scars from 37 years of woodworking. Possibly the worst was finishing up a blind mortise with a 3/4" chisel; a paring cut broke out through the piece on end-grain, entered my left hand near the thumb, sliced across the palm, plunged into the meaty part of the palm, and exited out the bottom... I was 18 or 19.

Hey, I cut myself when I demo'ed for your club too! (unpacking my tools before the demo)

Re: Cautionary tale from last night

#10

First Words

Al Kapocius

According to Bill Grumbine, the first words after any mishap is, "For the purposes of this demonstration...."

Al Kapocius

Re: Cautionary tale from last night

#11

Re: Too much information Keith!! And....

Jamie Donaldson

...I'm glad you didn't post photos!