Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Some new ones...

Posts

Some new ones...

#1

Steve Kubien

Some new ones...

Steve Kubien

Finally managed to take a few pictures...



This guy is ash, dyed twice (black then blue), hit with the liming wax and a UV protective varnish. I think the finial is too fat but since I haven't done many (less than 10), I can live with it. I'll likely re-do it.



I really like this one. The shape is a little different than a lot of what we see. My thought was to keep the lid simple to work with the vessel itself.

Both are 5" x 3" without their lids/finials. comments and critiques are welcome.

Steve

Re: Some new ones...

#2

Very sweet Steve.

john lucas

Re: Some new ones...

#3

Re: Some new ones...

Steve Criscenzo

The finish on the ash is very nice. It has a 3D feeling to it.

Great work.

Steve

Re: Some new ones...

#4

Re: Some new ones...

Texian

Finial not too fat; just need to reshape to echo shape of hf. Round/radius bottom edge of hf into the base to create a bit of "lift". Nice work.

Re: Some new ones...

#6

Steve Kubien

Re: Some new ones...

Steve Kubien

Thanks for the comments Texian. You are very correct about giving some lift by rounding the bottom a bit. I almost always forget to this until it is too late!

Re: Some new ones...

#7

Steve Kubien

Re: I like!   How big are they?

Steve Kubien

Scott, you're not still fiddlin' with them handtools are ya? :D haven't you got your lathe working yet? Both of these are about 5" tall and 3" wide, plus the lid/finial.

Re: Some new ones...

#8

Umm, Err, Well...

Scott Burr in Ben Lomond CA

I got the lathe working, got some of Doug's tools, Then got layed off >(

At least I got a big tax refund this year. So I just ordered a chuck, drive center, and and drill chuck.

Maybe sometime soon I'll be able to take a stab at making handles for Doug's tools. :)

I still need a sharpening jig and a new grinding wheel and a parting tool. :\

Re: Some new ones...

#9

Steve Kubien

Re: Umm, Err, Well...

Steve Kubien

Whoa, bummer. Sorry to hear the news.

Well, here's where your fl*t tool skills may come in handy. You could make a sharpening jig. There are a ton of plans on the internet. Not sure about a grinding wheel though.

Hope things start to look up for you.

Steve

Re: Some new ones...

#10

You HAVE A Grinder?

charlie belden

I've got a 6" grinder and two sets of wheels for it that'rejust sitting in the shop gathering dust (and cobwebs - spider problem) you're welcome to. I'm just down the hill from you, maybe a mile and a half from Lark & 17. If you could use this stuff e-mail me and I'll send directions and phone number.

Re: Some new ones...

#11

Re: Some new ones...

Jennifer Indy.USA

Love em both Steve. Very nice.