Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Double Gloat

Posts

Double Gloat

#1

Double Gloat

Steve Criscenzo

Had a friend call and say he was having some tree work done and did I want some wood. I said sure, save me 4 or 5 pieces. Turns out he saved 4 or 5 pieces from 4 trees. Wood is generally 20 inches in diameter and includes Maple, Hickory and Poplar. Also picked up some Cedar along the way. Since the wood was so heavy, I took the oportunity to finally get a hoit for the truck. Pick up a 1 ton hoist from HF added a cable winch and made a mount for the traier hitch. Seems to work well. Now if I only had the time to turn it all. Steve

Re: Double Gloat

#2

Re: Double Gloat

Cyril Griesbach

Seal the ends, Steve and you'll be good to go for a while.

Re: Double Gloat

#3

Re: Double Gloat

Matt Overton

Have fun. Thanks for the idea for the hoist!

Re: Double Gloat

#4

Re: Hoist Mount Detail

Steve Criscenzo

Here is an additional photo of the hoist mount.

Re: Double Gloat

#5

Steve, Thanks for the hoist info...nice haul.

Gil Jones

Re: Double Gloat

#6

Dick Hines

Re: Double Gloat

Dick Hines

Nice lifting rig. It I have trouble lifting logs into the truck I just get my wife to do it.

Re: Double Gloat

#7

Re: Double Gloat

Steve Criscenzo

Even with help (another strong guy) some of these logs were scary. Plus, now that they are home, I need to move them to prep them. I figures a hundred bucks for the hoist was far cheaper than a hurt back. Plus, since it is a standard trailer hitch size, I am thinking of putting a receiver on my lathe so I can use it to mount heavy blanks.

Re: Double Gloat

#8

Re: Double Gloat

john lucas

Steve I like the idea of mounting the hoist on the receiver hitch. I think I could change the design of the mount to make it fit my 4x4. I've also been thinking about making it fit my small trailer. With a proper design I could adapt it to both and swap back and forth. That would be really handy.

Re: Double Gloat

#9

Re: The hitch took two tries

Steve Criscenzo

John

The key to the hitch mount is to make it rigid. When you have 200 lbs on the end of a 5' lever it puts a lot of torque on the fixed point. In addition, since I wanted to work with the tailgate down, I needed to be about 18" from thje hitch receiver. My first try was too flexible and did not work.

I ended up buying a extender for my 2" hitch from HF (about $11). I had some 4x4x1/2" Aluminum channel that I ripped in half and then bolted the pieces to either side of the extender. Used 2 1/2' bolts. Seems to be plenty rigid but I may add a block to the tail end that extend to the ground for a bit of added support.

Re: Double Gloat

#10

Before the Divorce.....

Barry Irby

my wife loaded mine too, but since then she won't help.

Now, when I get a blank or log I can't handle, I hitch my cat to it. On the really heavy stuff, I have to use the whip. :D