Waves 3 the process
Tery Scott
See on my web site last one
http://www.timberly.co.nz/Default.aspx?PageID=802799&Page=2&A=PhotoGallery&PID=2621&Items=6
Waves 3 The process
I sold Waves 2 not so long ago and wouldn�t you know it I had an email a week ago asking how much it was vire my web site .When I said it had sold I got a telling off as I hadn�t marked it as being sold . Soon came to a compromise by saying id make another similar.
Wont worry me if this commission goes or not as I kind of like these hanging on my own wall
This will have 36 4 inch bowls turned in it . I have to ask why I do these as I can make 36 bowls easily in the time this takes to make but I wont get the price of 36 bowls.
Still I am always happy as this pushes my boundaries and tool skills .You cannot afford a lack of concentration or ever turn your back to the work
The Fly wheel as I call it is 1100mm Dia as large as I can turn on my modified stubby 1000 .When I get to the corner bowls I may have to chop off the corners so it will turn
The time the set up takes for each overlapping bowl can be extreme time wise as I spend ages getting perfect balance so I can turn at half a decent clip as many of the bowls lap twice and sometimes 3 into there neighbours so allot of air
Timber is Rosewood
Comment if you wise




