Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

thin wall turning

Posts

thin wall turning

#1

thin wall turning

tony tomlinson

HI all

I'M ANOTHER NEWBIE TO WOODTURNING. i TOOK A PEN/BOTTLE STOPPER CLASS AT THE LOCAL WOODCRAFT STORE AND GOT COMPLETELY HOOKED. fOR WHAT I NOW HAVE INVESTED IN TOOLS AND EQUIPMENT, MY PENS WILL NEED TO SELL FOR ABOUT $1000.00 EACH SO I CAN PAY FOR ALL THIS STUFF. wHAT REALLY CAUGHT MY ATTENTION MOST WAS A THIN WALLED VESSEL I SAW AT A LOCAL GALLERY. THE WALLS OF THE PIECE APPEARED TO BE ABOUT 1/16" THIN AND i'M ASKING WHAT MIGHT BE THE BEST TOOL FOR THIS TYPE TURNING. THE OPENING OF THE VESSEL APPEARED TO BE ABOUT 2 1/2" TO 3" DIAMETER. ANY THOUGHTS?

ANYBODY WANNA BUY A $1000.00 PEN?

Re: thin wall turning

#2

Re: thin wall turning

Juergen

You probably have the tool already. What you need is free. Join a club and hook up with a mentor. Then Practice, practice, and then practice some more.

Re: thin wall turning

#3

I'm gonna want to see the pen first!

mike

Re: thin wall turning

#4

Re: thin wall turning

Bill Youngblood

When I bought my boat, I had some fish that were worth $1,000 per pound. Want to trade a pound of fish for a pen? :)

Best advice besides joining a local AAW chapter, find local demos and symposiums. AAW has one in Hartford, Connecicut in June and there is a good one in Chicago August 20 -22. There are also a lot of great DVDs. out there. Good luck.

Re: thin wall turning

#5

Re: thin wall turning

john lucas

I could not agree more about joining a club. You learn so much and make great friends.

When I do thin wall turnings I use 2 tools depending on the size of the opening. For large openings I just use the bowl gouge with the flute pointing toward the left. This is just like I turn box interiors.

for smaller openings I use the John Jordan tools for smaller vessels and then the same tools held in a captured bar rig for larger vessels.

Re: thin wall turning

#6

Re: thin wall turning

Don at Central Illinois

When I first started turning pens (earlier this year), my first one cost about that much. I won't buy one but I might trade one of my $1000 pens for your $1000 pen. As others have said, look for a mentor, turning club and DVD's. Good luck and make sure you post photos.

Re: thin wall turning

#7

Re: thin wall turning

Jim Rutten

HI TONY,

I'M ONLY DEAF IN ONE EAR, but thanks anyway for speaking up. Go to www.woodturner.org and click on "Find a Chapter" and follow the instructions to find a chapter near you.

Re: thin wall turning

#8

Re: thin wall turning

tony tomlinson

Thanks much for your responses. As suggested, I contacted a local woodturners club, and I've already had two guys who have volunteered to come see my setup and help me get started. What a great group, what a great attitude. By the way, one fella suggested using the Hunter ring tool, apparently it's a shaft with a small circular cutting wheel, so I'm going to check that out.

Thanks again.I hope some day I get good enough to help the next guy.