Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

New workshop

Posts

New workshop

#1

New workshop

John K Jordan


Well, it's a start. This is for the basement under the woodworking side. The dirt is in the future root cellar, right under the lathes. The basement will also house dust collection, air compressors, and storage. The skid-steer is sitting where the tractor maintenance bay will be on the "dirty" side. That side will have space for welders, grinders, and such. French doors from the woodworking side will lead to a deck that overlooks the woods and the small horse pasture behind the barn.

It is a huge amount of dirt to move, especially without big equipment. Fortunately I have a good place next to the site to put most of it - building up and widening a road down the side of the ridge.

It will be nice to get the lathes and other tools out of the garage. I have new flatwork equipment in storage, mostly Powermatic.

JKJ

Re: New workshop

#2

Ellis Walentine

Re: New workshop

Ellis Walentine

Glad to see you're thinking big as usual, John. One thing that came to mind when you mentioned the root cellar under your lathe(s), is that you might want to arrange a couple posts and beams under the floor joists, as well as some boxing, to really stabilize that floor area.

Ellis

Re: New workshop

#3

Re: New workshop

John K Jordan

Good idea. There will be a wall under that area but I hadn't thought about the boxing. I may also take the opportunity to run a couple of i-beams across the space perpendicular to the floor trusses - I have a pile of big steel next to the barn.

JKJ

Re: New workshop

#4

Congrats John !

Don Orr

Off to a good start. Best of luck with the project.

Re: New workshop

#5

Re: New workshop

Jeff Brockett

John, when I built my workshop I went for as much electrical power as possible. Had a separate 400 watt service box installed and am glad I did. Installed outlets every 4 feet and put in several 220 service outlets to run the big equipment. Figured while I was at it might as well do it right the first time. Looks like you are off to a great start.

Re: New workshop

#6

Re: New workshop

Doug Thompson near Cleveland

Cool, show us pictures of each step or post them on facebook.

Re: New workshop

#7

Mike Stafford

Lacking a few of the amenities.....

Mike Stafford

but it certainly has potential....

Sounds like a dream shop to me John. Have fun and take lots of pictures so we can share vicariously.

Re: New workshop

#8

Re: New workshop

John Lucas

John What my good friend Graham Campbell and his wife Kim Winkle did was to build sidewalk entrance that goes from the high ground directly into the shop. On the right side of the sidewalk they dug out so that it has a depth the same height as the bed of their pickup truck. This way they can back up to the sidewalk and unload heavy equipment.

their shop is built on a hill which made this very easy. then they have the dust collection, compressor and more storage on the dug out area underneath the shop. Not all that different from what your doing.

Re: New workshop

#9

Steve Kubien

Re: New workshop

Steve Kubien

Kinda rustic, aint't it?

Runnin' and Duckin'

Steve

Re: New workshop

#10

Re: New workshop

Bill Hale The Wood Spinner

Consider putting Outlets in the ceiling. They are a great way to have power in the middle of the room with no floor cords.

If you don't need to save heated or cooled air consider just blowing the dust collection out onto the ground. No bags. Sure makes it easier.

Bill

Re: New workshop

#11

Stuff in Storage

Mark Mandell - Gone Round In Jersey

Yeah, but you have a "bobcat" AND a digger. I got a basement shop and a shovel. :D

Re: New workshop

#12

Re: New workshop

John K Jordan

A loading dock is a great idea, especially if all of your trucks have the same bed height. I have a fork lift (actually forks that fit both the skidsteer and tractor) which help a lot for heavy things.

Speaking of trucks, if you know anyone in the area who could use it, I have a spare 1-ton flatbed dually with a 350 V-8 that I am willing to sell cheap or trade for something. I used to use it to pull the tractor and have hauled many tons of fertilizer, logs, and rock. It's old ('75) but runs very well. I rebuilt the carb, new wheels/tires, exhaust system, etc. And no one would ever steal it!


JKJ