Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Was it worth it?

Posts

Was it worth it?

#1

Dick Hines

Was it worth it?

Dick Hines

Here is the piece I was working on when the chuck got me. I was finishing the bottom.

This a piece of Jobillo. it's 2 3/4D x 4H with a ebony bottom and finial.

Re: Was it worth it?

#2

Re: Was it worth it?

518 392-7769

The finished product is certainly beautiful, but whether it was worth it or not is something I think only you can answer (unless you want to picture the damage to your finger and give a 1-10 pain scale value)

Re: Was it worth it?

#3

Steven Antonucci

Scale issues?

Steven Antonucci

For my tastes, even though the elements are very well done, I think that the scale of the lid to the vessel is a little too large. same issue with the foot. The bead element in the final could have been a little lower to appear "grounded" to the vessel, but being that height, looks to me like it's hovering (a bit). I am guessing that an adjustment of 1/4"-1/2" down is where I'd like to see it.

If you wanted to try to turn another lid, you could do it from a scrap of maple or similar and just dye it with a marker to see if you liked it better that way.

My two cents.

Steve

Re: Was it worth it?

#4

Re: Was it worth it?

Keith T

HI Dick...Yep! Just remember, we only have a limited amount of fingers!