Beall collets
ted evans
Can someone tell me if the ER 40 collects fit in the Beall collet chuck? Beall only list up to size 3/4" and I would like to have 1" if possible, or at least, 7/8".
Thanks.
Ted
Knowledge You Can Build On — Est. 1998
Beall collets
ted evans
Can someone tell me if the ER 40 collects fit in the Beall collet chuck? Beall only list up to size 3/4" and I would like to have 1" if possible, or at least, 7/8".
Thanks.
Ted
Re: Beall collets
Russ Fairfield
NO, the Beall uses the ER-32 collet and the maximum size is 3/4"
Re: Beall collets
Ken Vaughan
ER 32 collets are normally a 3/4 max but the last year or so I have seen a few sources that get an extra 16th - I suspect it is in the metric sizing.
Looked at little machine shop for MT collets and they go to 3/4 inch also.
Machinist 4 jaw chucks are adaptable to a variety of backplate threads as an alternative.
Re: Beall collets
ted evans
Thanks for the info Russ & Ken, it is what I expected but was hoping otherwise. I have a 5C collet chuck that I use for the larger sizes but the Beall is more convenient and, less weight.
Ted