Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Ash Goblet

Posts

Ash Goblet

#1

Ash Goblet

Jeff Rich

Hi everyone!

Here is an ash goblet I turned as practice and will probably put into the craft show this year.

Practice for a pair of goblets I will be making for a good friends wedding.

This is a little over 7" tall and 3" in diameter.

Re: Ash Goblet

#2

Re: Ash Goblet

Bill Grumbine (Kutztown PA)

It looks like you are off to a good start Jeff. How did you finish it? Do you intend to drink from it? Drinking from these things can have a bearing on what you use for a finish, especially for porous woods. Overall, it looks nice.

Re: Ash Goblet

#3

Re: Ash Goblet

Jeff Rich

Thanks Bill!

My start on these goblets was about 15 years ago after seeing some really poorly turned and even more poorly finished goblets. I was told by the guy that turned them, My finish is a trade secret that uses a 3 part spray epoxy.

So..I ventured to turn my own. In those 15 years I have learned a few things.

I used to use salad bowl finish on most of the goblets but have gone to BLO.

On the inside of the goblet I rarely put any finish, unless I know it will not be used.

I have tried numerous hollowing techniques, the regular scraping out, the gouge out, the "Raffan" cut, which I can not seem to master, various ring tools.

The termite tool seems to work best for me, followed by a heavy scraper to smooth out any bumps along the way.

I have made a couple of funnels along the way, I just call them bottomless cups, LOL.

I will post another pic of the same days turning in a few days.

Thanks again!