Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Questions on Nova 1642 VS 3000

Posts

Questions on Nova 1642 VS 3000

#1

Questions on Nova 1642 VS 3000

Barry Irby

I know the 1642 is the update on the 3000. What are the differences? If you had a chance to buy either one (used) with the 3000 being $250 cheaper, which would you choose?

If you have either, what accessories came with it? Did you get a chuck?

Re: Questions on Nova 1642 VS 3000

#2

Steven Antonucci

1624

Steven Antonucci

The headstock casting is much heavier. The ways ara also completely redesigned. the tailstock is also much beefier. All around a much sturdier design.

That said, I have a Nova 3000, and it is a great lathe for the money. If someone would trade with me for $250, I'd take it in an instant. I did get an original SuperNova chuck in the deal (via Woodcraft) to sweeten the pot.

S

Re: Questions on Nova 1642 VS 3000

#3

Re: 1624

John Lucas

Just about every little thing that I didn't like about the 3000 they improved on the 1624. I think it is a better machine. However, the 3000 was a good machine and I would have to think pretty hard about the $250 difference. Nothing on the 3000 was particularly bad, just needed improvement. The width and weight of the bed is probably the best improvement. It lets the tool rest sit better, especially when you are trying to make small adjustments to the tool rest. the 1624 is a beefier lathe and that's nice.

Re: Questions on Nova 1642 VS 3000

#4

Steve Kubien

Re: Questions on Nova 1642 VS 3000

Steve Kubien

What's the hp on the 3000? I thought it was 1hp vs 1.5hp on the 1624 but I could be mistaken.

Re: Questions on Nova 1642 VS 3000

#5

Re: Questions on Nova 1642 VS 3000

Jorge Casta�eda

Hi Steve,

Mine, about 4 years old has 1 1/2HP motor, but a friend's with an older one has only 1HP.

Re: Questions on Nova 1642 VS 3000

#6

Steve Kubien

Re: Questions on Nova 1642 VS 3000

Steve Kubien

My 1624 is 1.5hp but I wasn't sure about the 3000.

Re: Questions on Nova 1642 VS 3000

#7

Re: Questions on Nova 1642 VS 3000

Walter Ahlgrim

The biggest problem with the 3000 was its nasty habit if snapping the motors shaft flush with its bearing. I believe the 1624 has a larger shaft diameter.

Walta

Re: Questions on Nova 1642 VS 3000

#8

Re: Questions on Nova 1642 VS 3000

Steve Harder

Motor shaft on a 1624 is .875 or 7/8 inch.

Re: Questions on Nova 1642 VS 3000

#9

Re: Questions on Nova 1642 VS 3000

Larry

I bought a 3K new years ago. I love it. Were it me I'd go for the 3K and use the $250 for an Axminster, Teknatool, or Vicmarc chuck.

Re: Questions on Nova 1642 VS 3000

#10

Re: Questions on Nova 1642 VS 3000

Larry

I remember it being a problem only with one brand of the 2 types of motors on the 3K.