Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Turning grinder revisited

Posts

Turning grinder revisited

#1

Turning grinder revisited

Carol Reed

My plans for a slow speed grinder fell through. So I ordered a couple of zirconium belts from Lee Valley and resurrected my old 1" strip sander. I have and old slow speed motor on it. Should work nicely, but...

Heard tell from someplace that the Wolverine jig can be used with this.

Anyone done it and can post pics?

Re: Turning grinder revisited

#2

Re: Turning grinder revisited

john lucas

Carol I started to do it to my cheap 1" grinder. You may have to remove the table to be able to use the Wolverine but it will work. When I took a class from Frank Sudol he used one but he ground free hand. I still plan to build a strip sander one of these days and add a reversible DC motor so I an run it at any speed and forward or backward to let me play a little with sharpening techniques.

Re: Turning grinder revisited

#3

Re: Turning grinder revisited

Carol Reed

I just came in from playing with it for about an hour. Its running at a little over 1100 RPM - the motor that is. The pulleys are alike. The motor gets warmer than the tool I am sharpening!

So at that speed it is not a hog. I did all my scrapers, parting tools, roughing and spindle gouges. I just angled the table. The parting tools I free handed. I really like it for those tools. I can take my time and finesse the edge. Works great.

It does need an "improvement" though. The platen is not rigid enough. Its just chintzy flat stock and designed such that its weak spot is below the table and it flexes at that point at the slightest touch. I'll have to figure something out and take it to my brother, the welder.

However, I have no idea how to do bowl gouges or skews. I hope someone has married a Wolverine to the 1" strip sander and will post a picture. That would sure cut down on the head scratching.

Re: Turning grinder revisited

#4

Sounds like a challenge

Dave Smith, Longview, WA

Hi Carol,

I got a couple of ideas. Should be a fun day Monday exercising the gray cells. Is the motor reversible?

Dave Smith

Starting to pack up in Mesa, AZ.

Re: Turning grinder revisited

#5

Re: Sounds like a challenge

Carol Reed

Not the motor that is on it now. But I have other motors! And some pulleys to make it go the speed I want.

If you're packing already, does that mean you're moving out. Gonna stay here a few days before heading home? You are welcome, you know, especially since staying here before Mesa was a sNOw go!

Today is the first day of spring. That means there is only one more snowstorm to go! LOL! :D :D It has really been nice up here this last week. More! More! I want more of the same!

BTW, the painter is supposed to be here on Monday to paint the kitchen. He won't be in our way though. He kept postponing and there is no way I am going to postponed him! If he shows up. >(

Eat your Wheaties before coming up. I have a small effort that requires more oomph than I have by myself. :)

Re: Turning grinder revisited

#6

Re: Turning grinder revisited

Texian

Carol, What grit belts are you using? Should have potential for super fine edges without expense of a Tormek, esp. w/ slow or variable speed motor.