Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

OT (kinda) Woodturners near Murfreesboro, Tn

Posts

OT (kinda) Woodturners near Murfreesboro, Tn

#1

OT (kinda) Woodturners near Murfreesboro, Tn

Jim Rutten

Hello,

On our way down to JCCFS we are planning to stay overnight at Murfreesboro (hope I spelled that right). I was wondering if any of you could recommend a good restaurant for road weary travellers. Please let us know where it is and what your favorite thing on the menu is. Thanks. :)

Jim

Re: OT (kinda) Woodturners near Murfreesboro, Tn

#2

Re: OT (kinda) Woodturners near Murfreesboro, Tn

John Lucas

Jim lived in Murfreesboro for years but it's doubled or tripled in size. I've eaten there a few times but will have to look up the places. One was a Thai place that was excellent. I'll see if I can find one for you.

Re: OT (kinda) Woodturners near Murfreesboro, Tn

#3

Ellis Walentine

Home of General International USA

Ellis Walentine

Our sponsor, General International, just opened a new US distribution center in Murfreesboro. My old pal Scott Box, formerly of Delta, then Powermatic, then Steel City, is now in charge of the new General operation there. Maybe they have some items in the dented and scratched bin that need a new home. :)

Cheers,

Ellis

Re: OT (kinda) Woodturners near Murfreesboro, Tn

#4

Re: OT (kinda) Woodturners near Murfreesboro, Tn

Emmett Manley, Lakeland, TN

You might want to consider spending the night at the Nashville Airport Marriot hotel. We spent the night there two weeks ago en route to JCCFS and had a fantastic room -- winter weekend rate of $69 for a $230 room -- then two wonderful meals in their Two Rivers Restaurant. Everything on the dinner menu was first class and the breakfast buffet was world class -- everything from lox to blintzes.

Plus, you don't have to drive around looking for a restaurant. I highly recommend the Nashville Marriot and I am a very critical person.

This hotel is only 25 miles or so from Murfreesboro. Remember that US Highway 64 from Chattanooga to Brasstown is still blocked by the November rock slide, if you plan to go the next week or two.

Re: OT (kinda) Woodturners near Murfreesboro, Tn

#5

Re: OT (kinda) Woodturners near Murfreesboro, Tn

john lucas

I forgot about the road blockage. That's the route I usually take. I'll have to plan another one.

Re: OT (kinda) Woodturners near Murfreesboro, Tn

#6

Re: OT (kinda) Woodturners near Murfreesboro, Tn

Emmett Manley, Lakeland, TN

John,

Highway 68 from Crossville to Murphy, NC, (via Sweetwater) is a good route. Pretty drive and no trucks. There is even a shortcut just before you reach Highway 64 near Murphy.

Or, you can take I-24 down to Chattanooga, then I-75 to Dalton, Georgia, and loop back up to Murphy. A little more involved routing, but also nice. I have tested both of these detours since the rock slide block of Highway 64 in November.

Check with TDOT (Tennessee Department of Transportation) as Highway 64 should be open in a few weeks.

Re: OT (kinda) Woodturners near Murfreesboro, Tn

#7

Re: OT (kinda) Woodturners near Murfreesboro, Tn

Jeff Brockett

The Catfish Den is a good place to eat near Murfreesboro. It is just off the Sam Ridley parkway.