Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Finials and Pedestals on Hollow Forms...

Posts

Finials and Pedestals on Hollow Forms...

#1

Finials and Pedestals on Hollow Forms...

Wally Dickerman in Arizona

Is there a formula for achieving good balance when using a a finial and pedestal on a hollow form? I do know that they should never be the same height. The finial should be either shorter or taller than the pedestal. Would the rule of thirds apply here? A 3 inch tall pedestal and a 4.5 inch tall finial? Or a 6 inch tall pedestal and a 4 inch tall finial?

Does the height of the vessel matter?

Is there a better formula or is it just a "whatever looks right thing"?

Wally

Re: Finials and Pedestals on Hollow Forms...

#2

Keith Tompkins

Re: Finials and Pedestals on Hollow Forms...

Keith Tompkins

Hi Wally, I haven't been able to come up with a definitive rule myself, but there are some guidelines I follow. First, the finial must be finer, more delicate than the pedestal. Even if they are the same diameter, the appearance is awkward. On most pieces the foot is far too small....giving the appearance that the piece is going to tip over.

Re: Finials and Pedestals on Hollow Forms...

#3

Re: Finials and Pedestals on Hollow Forms...

Jennifer Indy.USA

Wally I don't ever think much about formulas but go by what I think looks good. I think you have a keen enough eye that you can go that route too. In fact you taught most of us about what looks good.

Jen

Re: Finials and Pedestals on Hollow Forms...

#4

Re: Finials and Pedestals on Hollow Forms...

Tery Scott

All I know is everyone else makes them look easy