Yes! You're all correct!
Don Pencil
I had to giggle at myself yesterday after reading your posts on making tools and goodies. I had just left the shop after making a nozzle for the sandblaster gun. Store price for ceramic nozzle $12, tungsten carbide $22.
I can make these out of 1018 steel 20 or more at a time (which I have lots of for tools I manufacture) for about $.25. Depending on the media being used they will last at a rate of 10 to 1 or or better. It's a good deal.
OK, so I do it too. And I agree that if you can it is usually fun (if it gets done quickly and easily) and gratifing. It does advance the tools we use in our shops when those that can do.
I personally loved reading the posts on this and related topics in earlier threads.
The point I was attempting to make, and obviously did a poor job of it, was to point out that there are those who have the tools, machinery, and knowledge to make and/or create tools.
Remember, this all started out in posts about safety.
Very often on the posts those who have metal working mills, lathes, forges, and experience neglect to tell the others that. The poor dude or dudette reading figures that they tool can do this. When making and reporting about the more diffcult tools general terms like "all I did was cut it, drill it, bent it, grind it, tapped it............" give the impression that it is easy and anyone can do it. This occures from time to time. If you are posting, try to avoid it. If you are reading a post, check out the next two paragraphs.
Many static tools can be made by any woodworker and in most cases it is a very good idea to do some of this. One can learn a great deal by doing so. Various types of guages are great example. Fairly easy to make and the correct angles cannot always be found at the store. A curved 3/4" x 16" hollow vessel tool is another issue. If you can, great, but 99% have no way of doing it and even the straight tools in some cases.
If you can, keep it up.
If you haven't, be sure to find out from the one who posts about the tool they made exactly how it is done and what tools are needed. Also make sure you are aware of any issues in making or using the tool that couldbe harmful. An example would be in making a captured system. The system must be adjustable on both the front and backend so that it can be adjusted for any tool to insure that the tip always travels perfectly level at all times. If it does not, DANGER.
Sorry I did not express myself better in the other post. I hope this corrects that and encourages all to try.
ALSO, if you want to know I will tell you how all of my manufactured tools are made and what you need to know about hazards.
By the way, if you try to make the nozzles, they must be dead accurate or they will not work all or poorly at best.
Be Well,
Don Pencil





