More Wood Burner Pics
Jennifer Indy.USA
Okay here's some more Priddle Style NAPA brand woodburner pics. I know do-dad isn't a very good word to describe the little electronic parts but I don't know what they are called. They can probably be found in the watchamacallit isle. These pictures were with taken with my phone so they are lame at best. I do sugest that if you put one of these together, you mark on your dimmer switch which side is off otherwise you might turn the thing on and it will liquefy your NiCrome in a matter of seconds. Don't ask me how I know this. I was just glad I wasn't holding it over my workpiece or worse my leg! As far as the re-wiring of this thing I'm clueless. There were about 12 of us all just cutting each wire that Graeme told us. Cut this red one, cap this black one, swap this white one with that one. You'll have to go to that link that was posted a week or so ago to see exactly how it's re-wired. Hope this helps those of you who want to build your own super heavy duty wood burner. They really are fun and the textures you can get from the heavy burn are wild! I would suggest wire no less than 16 gauge for these. You want a relatively thick wire. Have fun but be safe!
Jen




