Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

tool rest for lathe

Posts

tool rest for lathe

#1

tool rest for lathe

Tom Russell

I am looking for a plan for a long, 22", tool rest for my lathe. Made of wood, I have some hickory. Know of a plan?

Re: tool rest for lathe

#2

Re: tool rest for lathe

Bill Howatt

No plan but if I were making one out of wood, I'd make it as beefy as possible and put in a channel to epoxy some drill rod into for the tool to ride on. I'd also be using a second banjo for support.

Bill

Re: tool rest for lathe

#3

Re: tool rest for lathe

John Lucas

Ditto on the second banjo. I didn't have one so I built a second banjo out of wood. I had to turn a 58" spindle and I used 2 lathes mounted back to back. I ran the wooden tool rest from one lathe to the other.

Re: tool rest for lathe

#4

Steve Kubien

Re: tool rest for lathe

Steve Kubien

Tom, a few years ago Shop Notes had plans for building a mini lathe entirely out of baltic birch plywood and a few off-the-shlef metal bits like nut and bolts. Sorry, I haven't got the issue number but it shouldn't be too hard to find.

Now, why would you want to? Are you thinking of trying to turn Japanese-style?

Re: tool rest for lathe

#5

Re: tool rest for lathe

Tom Russell

Steve, I have written Shop Notes for issue #. Conover shows a long wood tool rest, but no plan that will work. I turn legs for windsor chairs, a 21" turning. Wood is cheaper than hiring a machine shop. Thanks for the suggestion.