Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Rusted loops

Posts

Rusted loops

#1

Rusted loops 

Tery Scott



Well I have been having fun

At the moment I am enjoying my new journey in woodturning

I have always wanted to do some biggish hollow forms.Success at last !!! Well this is the first large form (14 inches high 1/4 wall to allow for carving )I haven't gone out the side through the bottom or taken the roof off.

Normally I have calipers by the dozen that I am continually checking the wall thickness they all lie I am sure

But with my new Kelton lazer and hollowing rig I am finally having some success

I have always thought anyone using these captive rigs were pussies but I have to admit my old body sure liked not being kicked and bucked around

This is made from oak ,carved loop patten then highlighted with a poker machine followed by stain and paint effects followed by some highlighting with the airbrush

Re: Rusted loops

#2

Bill Blasic

Re: Rusted loops

Bill Blasic

Terry,

Great work! Nothing like a hollowing rig, let them call me what they like for using it but when you put hours into hollowing and then make a tiny mistake and the work is in pieces, ouch! The hollowing rig and laser help not only the body but just allows me to do better work. I'm glad your enjoying yours but I know that you do not have a lot of room for improvement as your work is way way up there.

Bill

Re: Rusted loops

#3

Re: Rusted loops

Carole Valentine

Cool piece, Terry. You have got to be one of the most prolific turners I know - I picture you dashing around your shop in fast forward like the road runner in the cartoon. LOL I have had an itch to do some larger forms too, but this old body says "Don't you dare - you've beat me up enough!" If you keep on blathering about how easy it makes it, you're going to have me spending money I don't have for a rig, darn you.

Re: Rusted loops

#4

Re: Rusted loops

john lucas

Terry I love that affect. I have a metal friend who took a class on rusting pieces. He said he didn't know there were that many kinds of rust. That should allow a lot of room to play on pieces like this.

I'm with you on the captured bar rigs. They do take longer to set up but sure are easier on the mind and body.

Re: Rusted loops

#5

Re: Rusted loops

Barry

Hmmm.........it looks like was made of cast iron and........rusted! I lke it!

Re: Rusted loops

#6

Steven Antonucci

No Money, no problem

Steven Antonucci

if you have about 2 hours to spare, you can make one from ordinary shop stuff. If you were closer, I'd let you borrow mine, sinc eit would fit your lathe out of the box...






I have used it once, and it works exceptionally well. I bought a laser pointer at Walmart for $2.64 and I could rig it up with a couple of minutes work and some old pipe (maybe this weekend, tomorrow is a shop day!)

Any questions, and I'd be happy to help...

s

Re: Rusted loops

#7

Steven Antonucci

Wow, my brother from another mother...

Steven Antonucci

a lot of my work is leaning towards metal patina, and I will be doing something similar to this in a few weeks, albeit slightly different.

Did you "brand" the surface with hot iron? (I'm going to be testing this idea when I get the forge going tomorrow...)

Steve

P.S. love the work, as usual...

Re: Rusted loops

#8

Re: No Money, no problem

Randy Johnson

You need to post some drawings for that.

Just looking at the pictures I don't see how everything is able to move around.

Re: Rusted loops

#9

Re: Rusted loops

Randy Gleckler

Fantastic Vessel there, I really like the finish and form you made. Really nice

Re: Rusted loops

#10

Keith Tompkins

Re: Rusted loops

Keith Tompkins

HI Terry, If you dip the turning overnight in a vat of "Coke", that will remove the rusty finish. (Just kidding!) Nice piece, and lots of potential! I expect to see the same finish on one of your suspended bowls too! well done my friend.

Re: Rusted loops

#11

Re: Wow, my brother from another mother...

Tery Scott

No I carved in the pattern with a v tool then highlighted the v to sharpen it up with a hot Scapel Pyrographer

Re: Rusted loops

#12

It never stops

Mike Foster

Terry,

I've said it before, but the amount of really nice work you produce just floors me. Can't see how there is enough time in a day to do it, even if you never slept.

Wonderful.

Mike

Re: Rusted loops

#13

Re: Rusted loops

Tery Scott

I may have made a blunder

I used the kelton Hollower and lazer arm but as the unit doesnt come with an actual laser pointer I contacted a few mates and they came back and said they use the Monster laser pointer unit recommending it to be the best.Sorry if I mislead anyone,it wasn't intentional ,

The $2 shop ones here just dont cut the mustard This one from Monster sure is a beauty

Re: Rusted loops

#14

Barb Siddiqui

We need a WC Article on this!

Barb Siddiqui

Re: Rusted loops

#15

Re: Rusted loops

Doc Green

Terry, . . . using a Kitty Kat rig! Never thought it would happen. :)

Great work! I'll second the opinion about the Monster hollowing rig.

~Doc

Re: Rusted loops

#16

Re: No Money, no problem

Tery Scott

Hi Steve

Great lathe you have there

I am going to pick up a second hand one this morning for an old boy in the club .

Amazing how these hold there value they still fetch $1200Nz here with a chuck

They just dont come on the market that often

We have six in our club that we have put on variable speed units so are great lathes to teach on

Sorry I am a toolaholic your rig just wouldn't do I am afraid L.O.l

Re: Rusted loops

#17

Steve Kubien

Re: No Money, no problem

Steve Kubien

Randy, I believe the large block on top of the table is not connected to anything.

Re: Rusted loops

#18

Dick Hines

Re: Rusted loops

Dick Hines

Beautiful work , Terry

I am with you on the captured hollowing rigs. I have a Kelton and now one Lyle's rigs. They make hollowing so easy and do not beat the body up.

Re: Rusted loops

#19

Outstandng !

Don Orr

Very cool Tery.

What is a "poker machine" ?

Re: Rusted loops

#20

Steven Antonucci

Correct (It's not rocket surgery!)- WC Article

Steven Antonucci

The basic construction is pretty straight forward. I actually am waiting for the AAW Journal to print my article on how to make it, but I can give you the highlights.

1) If you know the height of your lathe to center, build a platform that is roughly 3/4"-1" lower. If you look at my picture, you will see I used MDF, a bunch of screws and some wood glue. The length and width were determined by what I had on hand, and nothing else.

2) The board that I used is 6/4 surfaced and jointed flat and parallel. Iif I was going to buy one, I'd want something hard like a white oak.

3) The little block that attaches it from underneath tightens with a through bolt. I use a wrench to do it. The top of that block is slightly 1/16"? lower than the ways so that it can compress on the rail.

4) To drill the hole in the board to accept the hollowing tool, I put a drill chuck in the lathe headstock. I then used a piece of MDF along the length of the drill bit and onto the table to get a parallel line. I clamped a fence on this line, and rode the white oak board along the fence, which not only makes the tooling parallel to the length, but also automatically centers it on the centerline of the lathe (so the cutter is centered). I drilled all four corners to accept different sized boring bars, and each is drilled through the top to be secured by a screw.

Nothing moves, hints at moving, or binds even in the slightest. I'll shoot a quick video with some details for Youtube and post it for posterity.

steve

Re: Rusted loops

#21

Steven Antonucci

Then don't steal my idea ;-)

Steven Antonucci

I'll be playing with branding tomorrow... I'll post some pics if it's not a total failure :-)

S

Re: Rusted loops

#22

Been using the Kelton gate

Carole Valentine

I have been using the hollowing gate that fits on the turret of my Kelton coring rig. Don't think the older rigs have this feature. It's a U shaped gate and the tool shank is "captured" inside the steel rectangle that the coring blades normally pass through. Nice little additional feature on the new systems if you are not going too deep.

Looks like what you have there is not actually a captured system other than being "captured" by your hand on top and I don't think I could hollow if I couldn't rotate the angle of my cutting edge on the fly. I do that almost automatically depending on what cut I want and the grain of the wood.

Re: Rusted loops

#23

Re: Rusted loops

Jennifer Indy.USA

Terry I really like this texture and pattern. I'm curious about the part where you say you highlighted it with a poker machine. What is a poker machine? I'm feeling like this may be one of those "dumb questions" that I already know?

Thanks,

Jen :)

Re: Rusted loops

#24

Steven Antonucci

Correct in what is captured.

Steven Antonucci

The term captured is being used loosely here, because there is the perception that captured is a requirement. It is not. You are correct that you cannot rotate a cutter using this without stopping the lathe. If you stop the lathe, you could rotate the shaft to get a negative rake angle on the cutting tip by loosening the bolt and slightly twisting the angle.

Technically, this system is captured between the platform and the downward force appiled by my arm/hand over top of it. By being on centerline all of the time, most catches are eliminated. The width of the board and its mass provides a much larger torque arm and more inertial mass compared to the force generated at the cutting tip. Quite simply, the need to be captured is unwarranted, and could be ignored unless you were working at very large distances or diameters. (I also have a very small mini set-up -same platform, very small cutter-3/16" rod I think?)

I'll post the video to YouTube and you decide. I built my platform in about 30 minutes, and the entire setup cost me under $2.

Steve

Re: Rusted loops

#25

Re: No Money, no problem

Texian

Very cool.