Here is something new I turned and carved for "Maple Medley" exhibit. 16" at longest point,turned to desired profile, then carved. Sanded to 1200, then a coat of tung oil/poly mix daily for a month, wiped dry, sanded, coated again. Wood is bigleaf maple, very highly figured, bowl is goldleaf applied with airbrush. No title yet, all comments welcome.
Keith Beautiful as usual. Wish I had the time to attempt work like that. I'm sure it's very rewarding to finish and stand back and look at what you've just done.
Absolutely beautiful, and wonderful use of the wood. It makes me want to just keep looking at it, but also makes me want to touch it. Does it really need a title - it is just as beautiful without one
Thanks everyone for the kind comments. I'm not known as much of a bowl turner, so when I decided to turn a series of "signature" bowls, this series is what I came up with, combining the look of my linenfold work with the "S" shape of my serpentine pieces. You have to enjoy sanding in order to complete this kind of work, there is just no shortcut to time spent. Ric, I used a finely-ground gold-leaf paint for the bowl, I wasn't quite pleased with 23K traditional gold leaf. This piece would probably make a good frisbee....the leading edge of each wing is an airfoil, tapering to a fine edge on the trailing edge. I was very fortunate to be invited to participate in "Maple Medley" so this piece will be in Hartford. Yes, Don, I will bring it to "Showcase". For the last couple of years, my pieces were sold, or had to be somewhere before I could display them. I have another one started, black walnut burl with lid and finial. Thanks for all the kind comments! Keith
Don! Don't even think of selling your lathe! Seriously, I was an avid guitar student, and studied with some fine teachers. I gotta' tell you though, watching a nine-year old kid completely blow me out of the water was enough to make me want to sell my whole guitar collection! I know the feeling well. If I may suggest, set some goals for yourself, examine your strong and weak points, and keep moving forward, making small improvements on each new piece you turn.
Steve, while finishing this piece, I've almost got another one done! It only takes a few minutes to add each coat of finish, the key is patience, and knowing how much progress can be made at a time. I think too many turners try to rush the finishing process. I sand the finish until there are no shiny areas at all, dead flat. Then apply a new coat with a soft cloth, and wipe it completely dry after a few minutes. Next day, same process. Put it aside, then work on a new piece. Sometimes, I have several pieces at various stages.