Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Victorian Renaissance

Posts

Victorian Renaissance

#1

Victorian Renaissance

George Guadiane

The silver plate parts of this piece are from the Victorian Era.

The very fancy base was originally a very spectacular Reed and Barton "card holder" often found in the foyer of Victorian homes... The dish and handle parts were too badly damaged in shipping to recover, so I cut the base off and saved it for about three years, knowing what I wanted to do, but not knowing, if you know what I mean.

The lattice work top is the flower frog from (I think) an ugly sterling bowl that went to scrap.

I had this FABULOUS piece of crazy curly hard maple that I finally decided to get started with...



Diameter: 9 1/8

Height: 9 3/8

Sanded to 800 and buffed.

As Always, All Comments, Critiques and Questions Welcome

Re: Victorian Renaissance

#2

Re: Victorian Renaissance

Randy Gleckler

I think you did a fine job of blending all those pieces together and a Very nice platter in the middle of it. Nice work

Re: Victorian Renaissance

#3

Re: Victorian Renaissance

Don Orr

This came together very nicely George. I think the materials and textures work very well together. Wild piece of wood too!

Re: Victorian Renaissance

#4

Re: Victorian Renaissance

Dave Belser

Very nice George! Did you stick with the original shape and size (more or less) for the dish? I'm not familiar with what a card holder should look like.

Re: Victorian Renaissance

#5

Re: Victorian Renaissance

Frederick Nelson

You see these little tray with stand combinations in movies of the Victorian and Edwardian eras. The little silver tray the butler carried the visitor's card upon to the master of the house to announce the visitor. The little tray rested on the fancy stand (in some cases) and was called a "salvor."

Fred

Re: Victorian Renaissance

#6

Re: Victorian Renaissance

fgvanatta

A marvelous job of melding the metal and wood parts - a truly striking stand.

Frank

Re: Victorian Renaissance

#7

Nicely Done, George.

Cyril Griesbach

Re: Victorian Renaissance

#8

Re: Victorian Renaissance

Fred Bearman (Port Huron, Michigan)

Well done - and that would be a beautiful card holder in an elegant Victorian foyer! Everything seems to complement each other.

Re: Victorian Renaissance

#9

Thank You Everyone!

George Guadiane

Thank you everyone, I had fun getting this one done... The whole time, I wasn't sure I would like it, but now that it's finished... I like it just fine!

Thanks Dave, the original diameter was a little larger and it was more of a bowl shape with straight sides. As busy as the bottom is, the top part was all brite (bright) cut with decorations like birds and stuff and thre were little birds sitting around the rim for the swinging handle to rest on... Oh, and the handle had a dears head on top of it, complete with antlers.

I wanted to make this a little more like the cauldrons on the Olympic torches, I thought the base would carry it.

As it is, with the open work top, it would make a REALLY fancy pot pourri bowl/dish.