Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Dust collector leaks

Posts

Dust collector leaks

#1

Dust collector leaks

nick

I use a canister type dust collector that has recently begun to leak at the base where the canister sits on top of the fan housing. There is some gray plastic foam in the joint between the two parts that acts as a seal. I cleaned out the canister recently and might have knocked it slightly out of round but I'm not sure. Any suggestions about improving the seal or other possible fixes/improvements?

Re: Dust collector leaks

#2

Re: Dust collector leaks

arkie

I have applied a double layer of duct tape around the outside and noted a huge improvement.

Re: Dust collector leaks

#3

Re: Dust collector leaks

Scott Hurley in N VA

There's a product called "Seal N Peel", which is basically a removable caulk. I have a Jet DC-650 that was leaking around the base of the canister (little puddles of dust). I cleaned it and put a large bead of Seal N Peel around the base of the canister, and it sealed up all the leaks. I've used it before around the old windows in my house - really makes a difference. When you want to take the canister off, the caulk peels of very easily. I know that Tru Value hardware stores carry it.

Scott

Re: Dust collector leaks

#4

Re: Dust collector leaks

Nick

Thanks, Scott. I'll give it a try.

Re: Dust collector leaks

#5

Re: Dust collector leaks

Nick

Thanks. arkie.