Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Got a few finished

Posts

Got a few finished

#1

Steve Kubien

Got a few finished

Steve Kubien

Morning folks,

I finally got a few little guys finished. Left to right...

Ash, blackened with with rattle-can acrylic, 3" x 3"

Silver maple, triple dyed and wipe on poly,

Ash, wipe on poly, 4�" tall x 2�" wide.

All of these were turned green on the end grain but only the silver maple really moved. It really distorted in a happy way.

Comments? Critiques?


Re: Got a few finished

#2

Re: Got a few finished

John Lucas

Those are really nice. Was the silver maple closer to the heart or was the tree smaller. I've found this makes a difference in the movement.

Re: Got a few finished

#3

Re: Got a few finished

Don Orr

Really nice Steve. I thought they were bigger til I read the description. The Ash is my favorite.

Re: Got a few finished

#4

Re: Got a few finished

fgvanatta

I really like the silver maple. It may just be the picture (flash?) but the black one looks like the finish has been sanded off the sharp edges. Personally, I'm not really wild about that form. The other ash piece is - IMO - just so-so. Also, it looks like the bottom is cut/sanded at an angle, because it is leaning in the picture.

Frank

Re: Got a few finished

#5

Steve Kubien

Re: Got a few finished

Steve Kubien

The tree was about 14" in diameter at the base so, not very big for a silver maple. The tree-dude who took it out cut the bottom into a 6" or so thick slab so 6" diameter bowls/forms where as big as I could possible get. I opted to go end-grain to take advantage of the grain around the outside of the trunk.

Re: Got a few finished

#6

Steve Kubien

Re: Got a few finished

Steve Kubien

Ya, the black guy was an experiment. I'm still not sure if I like it. I can assure you the taller ash one if not leaning. It's the pic, and a lousy one at that!

Can I ask you what you think would take it beyond so-so? I am thinking in terms of form because I know there are all sorts of things which could be done like piercing, burning, texturing etc but I didn't want to go that route. Thanks!

Re: Got a few finished

#7

Steve Kubien

Re: Got a few finished

Steve Kubien

Thanks Don. I guess by your 'size' comment I must have done something right! Cheers,

Steve

Re: Got a few finished

#8

Cuties

Jennifer Indy.USA

These are all sweet Steve.

Jen

Re: Got a few finished

#9

All very nice, partial to the maple

Bernie

Re: Got a few finished

#10

Mike Stafford

Re: Got a few finished

Mike Stafford

I like "little" projects like this. They are an efficient use of wood, skill builders and a great break from projects that take many hours to complete. It has been my experience that they sell as well. People have somewhere to place "little" things and will collect "little" things. It is hard to collect a large number of 10" diameter hollow forms while in the same space you might display several "little" bowls and hollow forms.

I think the piece you turned in the "style of Andy" is beautiful.

Re: Got a few finished

#11

Steve Kubien

Re: Got a few finished

Steve Kubien

Thanks Mike. Had I mentioned "in the style of Andy"? No doubt that I was channelling him when this guy came into being.

Re: Got a few finished

#12

Mike Stafford

Re: Got a few finished

Mike Stafford

Steve, I certainly did not mean any disrespect nor was I casting aspersions when I made the "in style of" comment.

Millions of forms similar to what you turned have been turned by people other than Andy and I did not mean to imply that your beautiful little piece was in any way a rip off of his work. I meant my comment to be a compliment to you both.

The black form in ash would be changed considerably if you were to lime it. Dyed ash treated with liming wax makes a tremendous visual statement sometimes.

Re: Got a few finished

#13

Steve Kubien

Re: Got a few finished

Steve Kubien

As a compliment is the only way I could take it. To be mentioned in the same sentence as Andy, well, that makes my day! Thank you.