Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Spindle gauge

Posts

Spindle gauge

#1

Spindle gauge

ted evans

Hello All, I am looking for information, again. Sometime back, I saw a video clip of a spring loaded direct reading spindle gauge that looked to be quite handy. Unfortunately, I have lost the link to it and have forgotten the name. I think an individual or perhaps a small company builds it. If you have any information on the gauge, I would be most appreciative.

Ted

Re: Spindle gauge

#2

Re: Spindle gauge *LINK*

Michael Mocho

Hello Ted,

Here is the link to Peter Galbert's website- he is the chairmaker who makes and sell the caliper:

http://www.petergalbertchairmaker.com/caliper.html

I was fortunate to meet him last year at the Totally Turing symposium in Saratoga, NY where he demonstrated the device at the trade show. Very nice guy, and the caliper is great for setting spindle diameters without having to use a bunch of different conventional caliper settings. I frequently use it for production work- it works great!


img

link to Peter Glabert's website

Re: Spindle gauge

#3

JL

Lee Valley has a different one

JL

http://www.leevalley.com/wood/page.aspx?c=2&p=43199&cat=1,43513

The LOML bought this one for me. It is not as fancy as Galbert's gauge - but it is less expensive. I've used both and while I would like to have Galbert's gauge, I couldn't justify it - especially seeing how the LOML might get a bit "peeved".

Re: Spindle gauge

#4

Steven Antonucci

Peter will be at the NJW meeting later in March

Steven Antonucci

If you are anywhere near NJ, come on by! Not only will he be showing the caliper, but he'll be demonstrating his complex assembly techniques for his Windsors.

Steve

Re: Spindle gauge

#5

Re: Spindle gauge

ted evans

Thanks a million for the quick reply Michael, that is what I am looking for.

Ted

Re: Spindle gauge

#6

Re: Peter will be at the NJW meeting later in Marc

ted evans

Thanks for the info Steven. I think I will pass on going from Tennessee to NJ this time of year, actually, any time of year.

Ted

Re: Spindle gauge

#7

Re: Lee Valley has a different one

ted evans

Hello JL, yep, I agree the Galbert gauge is too expensive but it looks so much more convenient. Since it is a project for the wife, I can probably justify the Galbert.

Ted

Re: Spindle gauge

#8

Re: Lee Valley has a different one

Chuck Engstrom

With all due respect to the ingenuity of the Galbert, don't forget that the Lee Valley has a wider range of measurement, 0 - 4". I have one just like the Lee Valley, made by an earlier manufacturer, and it's plenty easy and convenient to use, plus can be set to hold any size in its range.

Best--

Chuck Engstrom

Re: Spindle gauge

#9

Mike Mills

Re: Spindle gauge

Mike Mills

I don't know about the new one but the Lee Valley style works well. The new one looks very nice also.

Mine is older, and probably like Chucks.

Made by the Corlin Co. and shown on page 40 of the January 1942 issue Popular Mechanics. Still works great.

Mike