Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

More leaf pieces

Posts

More leaf pieces

#1

More leaf pieces 

Tery Scott



These are made from Puriri http://en.wikipedia.org/wiki/Puriri

The footed one received a first in Carving in the Taranaki woodskills 2009

I was pleased as I was competing with a piece of woodturning against all other types of carving from Chip ,indigenous,traditional and this was the only piece of woodturning entered

The footed one stands about 8nches high The finish was natural wood with some prisma highlights to the berries followed by artist fixative

I used the fixative as anything else would have darkened the wood and spolt the effect

I had to get the leafs as thinas possible as Puriri is one of our densest timbers and I didn't want the finished piece to be over heavy

With the aid of my Kelton hollowing set I was able to achieve a finish inside that required very little sanding.I precutdepth gauge holes by drilling some holes around the piece so i could get the thinkness even

Getting the texture inside I used a very thing air drill die grinder that enabled me to get through the carved gaps Followed by sand blastic

Comments welcomed

Re: More leaf pieces

#2

Bill Blasic

Re: More leaf pieces

Bill Blasic

Terry,

A well deserved award! I really like what your doing with these, Great work!

Bill

Re: More leaf pieces

#3

Re: More leaf pieces

Philip

Tery, You are one amazing talent. Thanks for sharing this beautiful work of art. Phil

Re: More leaf pieces

#4

Re: More leaf pieces

Greg Haugen

Terry,

They're beautiful! They're all very elegant and stunning. Nice work.

Re: More leaf pieces

#5

Brad Vietje

Very impressive work, Tery!

Brad Vietje

Tery,

Great stuff! I may have to experiment with carving when I get a lot more time -- maybe in my retirement. There are some very impressive turner/carvers here, and you're right up there with the leaders of the pack!

Safe spinning,

Brad Vietje

Newbury, VT

Re: More leaf pieces

#6

Steven Antonucci

Never thought of that!

Steven Antonucci

Thanks for a great tip (cutting holes to measure thickness!) I never thought of that, even though I turn lots of pieces with voids for the same reason! If you know you are going to cut it, why not open a few windows?

Love the work, too...

Steve