Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

OnT: What can't you master no matter what you do?

Posts

OnT: What can't you master no matter what you do?

#1

Steven Antonucci

OnT: What can't you master no matter what you do?

Steven Antonucci

No matter how hard I try I simply cannot turn uniform beads in a series. They're always like snowflakes- no two alike!

In addition, I have never been able to core with the two most curved knives in my Kelton set. They scare the H*&%! out of me.

How about you?

Steve

Re: OnT: What can't you master no matter what you do?

#2

Steve Kubien

Re: OnT: What can't you master no matter what you

Steve Kubien

Invisibility. Can't do it consistently without my cloak.

Re: OnT: What can't you master no matter what you do?

#3

Re: OnT: What can't you master no matter what you

Scott in Falcon

I can't master the amount of time I seem to have available to play in the shop. If I could master that, then I am sure that I could eventually master everything else I want to! :)

Re: OnT: What can't you master no matter what you do?

#4

Nothing,

Barry Irby

I am the master of nothing. Not even my household. That is the domain of the cat. I do some things fairly well, but I have not mastered any of them.

I tried levitation. Take my work for it, don't even try. If you must, start low. It's better to fail by falling of a mat onto the carpet than to fall off the roof.

I tried time travel also. Made a mess of that too. I can only go in one direction, forward, slowly, one day at a time.

Any two beads I turn are lucky to share the concept of "Roundness". Or maybe it "roundish".

Re: OnT: What can't you master no matter what you do?

#5

JL

Re: OnT: What can't you master no matter what you

JL

Try doing sets of legs for a dining room suite - or a set of baluster spindles for a house. I guarantee that you will become reasonably expert in doing consistent bead and coves.

My lack of mastery is in bowl turning. I don't do much - but then again, I've got enough to turn with spindle work.

Re: OnT: What can't you master no matter what you do?

#6

Re: OnT: What can't you master no matter what you

Carole Valentine

I use the two most tightly radiused blades of my Kelton set constantly. I don't understand why they would scare you?

Re: OnT: What can't you master no matter what you do?

#7

Re: OnT: What can't you master no matter what you

john lucas

I can't master the TV remote or my cell phone controls.

I can turn 20 perfect beads in a row. Unfortunately I needed 22 so I cut a cove where those go. :D

I don't have a knack for making money. I can take on the same challenge others have found successful and something always goes wrong.

I am damn near an expert at spending money. If anyone has any they want spent I'll be glad to help you out. I'm really really good.

Re: OnT: What can't you master no matter what you do?

#8

Toasting English muffins

adrien

They're always partially burned.....

Re: OnT: What can't you master no matter what you do?

#9

Steven Antonucci

I have never taken a single core with either

Steven Antonucci

For whatever reason, the second the knife touches the wood, it is threatening to tear it out of the chuck. I can core with the straight and slightly bent knife without any such trepidation.

Without a doubt, I am either doing something wrong or there is something wrong with my knives. Since I usually have the exercise fail early on, I assume it's me. I do the same thing with the other knives, and it's fine...

If you were in the shop when I was coring, you'd be scared too...

Steve

Re: OnT: What can't you master no matter what you do?

#10

Re: I have never taken a single core with either

Carole Valentine

When you are starting the core, are you starting with the turret back far enough that the thickest (vertically speaking) part of the blade is supported between the columns? If you have the tool post very close to the wood when you first start the cut, it can twist between the columns. This is especially true with the curved blades. When I was first learning to use them, I had some pretty violent catches, and still do on occasion, but I have finally learned when to let the blade feed, when to hold it back a bit and when to push it. It seems to take all three during the course of a core. I have to hold it back more during the first 3rd of the cut...that's when it seems to almost self-feed.

Re: OnT: What can't you master no matter what you do?

#11

The woodpile!

Jorge Casta�eda

Like others, I tried levitation and invisibility, could not master either.

Perhaps i am not a master of any tool but I am very proficient with most of my tools, no problem with the kelton core saver; the only tool keeping it secrets from me is the Sorby spiraling tool that I bought on a weak moment at half price.

But the woodpile, why! seems I cannot turn fast enough to make a visible dent on it, worst, it seems to grow...

If you are having trouble with the core saver, I highly recommend Robo Hippy's dvd, I like it better that Mike Mahone's. Well worth the price.

Re: OnT: What can't you master no matter what you do?

#12

Re: OnT: What can't you master no matter what you

Don Central Illinois

I'm turning some HF's and trying for the 'perfect orb'. Always get an egg shape but nothing as close to round as I like. Oh, well like your Kelton, keep on truckin', we'll get it eventually.

Re: OnT: What can't you master no matter what you do?

#13

Re: OnT: What can't you master no matter what you

robo hippy

Flying! I want one of those birds in the Avatar movie. Only seen it 3 times, and it takes me back to my hang gliding days. Hate being a ground hog. Still get hyped up on good soaring days.

robo hippy

Re: OnT: What can't you master no matter what you do?

#14

Re: OnT: What can't you master no matter what you

Texian

It's easy if you use one of the blades from an old set of Craftsman molding cutters. But they all have to be that size.

Tried the Kelton and returned it for a refund.

My shop cat has mastered invisibility, and that's good enough for me. She can blend into any background.

How to turn art rather than crap, and how to have the artistic vision to know the difference.

Re: OnT: What can't you master no matter what you do?

#15

Steven Antonucci

If you could post a picture, it would help

Steven Antonucci

I think I get what you mean, and I think I am probably not doing what you mean, but I can't be sure. I use it the exact same way that I would with the two straighter knives, and it seems like you are recommending something a little diferent?

Thank

S

Re: OnT: What can't you master no matter what you do?

#16

Steven Antonucci

Fixing John Lucas :-)

Steven Antonucci

You can turn 20 beads, can't make money, but can't stop spending it...

How do we fix John Lucas?

Answer:

You come to my shop to teach me how to make 20 beads, never letting on that there is a secret to making 22. I pay you for your time, and then introduce you to my wife. At this point, you realize that you know absolutely nothing about spending money, having seen it done at a professional level.

You go home a better man, cash in hand.

Steve

Re: OnT: What can't you master no matter what you do?

#17

Steve Kubien

LOL!

Steve Kubien

Re: OnT: What can't you master no matter what you do?

#18

Most Everything

Don Orr

I don't think I have mastered anything. I am fairly competent at sort of an intermediate level with most things in turning, but certainly not a master at anything. Two beads the same-not likely. Two of anything the same is not likely for that matter. I have not tried anything segmented or done much coloring or carving yet and don't really have the time to work on them either.

Sadly, most of the time I'm happy when I don't destroy what I am working on at the time. I can usually make what I want within reason though.

Oh, and the whole "artistic" thing-not really happening for me.

Re: OnT: What can't you master no matter what you do?

#19

Plumbing, it's my curse!

Ron Bauman

Re: OnT: What can't you master no matter what you do?

#20

Re: If you could post a picture, it would help

robo hippy

The small curved blades drive me nuts too. One thing to check is get one of the plastic circle templates and check the curves of the blades. They are notoriously wambly. The tips do tend to go straight rather than following the curve of the blade because they are stamped, and the tip of the blade can't go into the stamp. Some times tweaking the tip inwards can help tracking a lot.

robo hippy

Re: OnT: What can't you master no matter what you do?

#21

Re: If you could post a picture, it would help

Carole Valentine

Steve, I replied under a separate post to this.

Re: OnT: What can't you master no matter what you do?

#22

Steve- might be a tough competition- spending

John Lucas

Re: OnT: What can't you master no matter what you do?

#23

Steven Antonucci

Joke:

Steven Antonucci

A man gets a call from his credit card company.

"Sir, we've seen a lot of suspicious activity on your card lately"

The man responds, "Yes, I know, I was robbed last week. The thief took my wallet and my card was in it."

"Well, then, why haven't you reported it?"

"Well, I checked on line, and I noticed he was spending less than my wife was so..."

Re: OnT: What can't you master no matter what you do?

#24

Keith Tompkins

Re: OnT: What can't you master no matter what you

Keith Tompkins

I started turning in earnest because turning was the weak link in my woodworking "vocabulary", and I wanted to improve it. It kinda' took over from there, now it's pretty much all I do. I turned furniture parts professionally as part of my job as a furniture maker, so I'm comfortable with coves and beads and such. Many of my "artsy" pieces require two identical parts, which luckily comes easy for me. I've always taken woodworking for granted, not thinking of it as a talent of skill. What I CAN'T do is play guitar as well as I would like...I simply do not have the aptitude to do well, no matter how much I practice. That frustrates me to no end! Those who play any instrument well truly have a gift...but then, they probably take it for granted as well :\

Re: OnT: What can't you master no matter what you do?

#25

Is there an AGA club close to you? 

Tommy Holmes in NW FL